ERP Week 6 Word Scramble
|
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
Question | Answer |
A barrel (sleeve) with a plunger that fits inside and needle attached to the other end is called a | syringe |
Syringes are made of | Glass or plastic |
The barrel (sleeve) of a syringe varies in volume from | 1 to 60 mL |
The most common syringe used is a | 3mL |
Insulin syringes are calibrated in | {U}Units |
Pulling back on the plunger creates a; | Vacuum |
Before using a syringe pull back on the plunger halfway up the barrel and then push the plunger forward. This is called; | Breathing the syringe |
The part of a needle that attaches to a syringe is called the; | Hub |
A needle attached to a syringe by sliding the hub onto the syringe and screwing the hub into a threaded insert called; | Luer-Lok |
Where the needle connects to the hub is called the | Hilt |
The entire length of the needle is called the; | Shaft |
The angled sharp end of the needle is called the | Bevel |
The diameter of the opening of a bevel is called the; | Lumen |
The gauge of a needle is the; | Bore size of the lumen |
As the # of the gauge goes up, the bore size of the lumen becomes | Smaller |
Safety needles are designed to reduce the risk of | accidental punctures |
Liquid medication should be drawn in the barrel and measured at the; | Top of the black rubber stopper on the plunger |
Created by:
adrouillard
Popular Medical sets