click below
click below
Normal Size Small Size show me how
Sanitizing
Cleaning and Sanitizing
| Question | Answer |
|---|---|
| What is the primary purpose of cleaning? | To remove food and other dirt from a surface. |
| What does sanitizing do? | Reduces pathogens on a surface to safe levels. |
| What are the characteristics of effective cleaners? | They must be stable, noncorrosive, and safe to use. |
| Name four types of cleaners. | Detergents, degreasers, delimers, abrasive cleaners. |
| What should you do before using a cleaner? | Follow the manufacturer's instructions and only use them for their intended purpose. |
| What is heat sanitizing? | Immersing the item in water that is 171°F (77°C) for at least 30 seconds or using a high-temperature dishwasher. |
| What are common chemical sanitizers? | Chlorine, iodine, and quats (quaternary ammonium compounds). |
| What is the importance of sanitizer concentration? | Not enough sanitizer makes the solution weak; too much can be unsafe and corrode metal. |
| How can you check sanitizer concentration? | Using a test kit made for the sanitizer being used. |
| What is the correct procedure for cleaning and sanitizing surfaces? | Scrape food bits, wash, rinse, sanitize, and allow to air-dry. |
| When must food-contact surfaces be cleaned and sanitized? | After use, before working with different food, after handling raw fruits and vegetables, after interruptions, and every four hours if in constant use. |
| What steps should be followed for cleaning stationary equipment? | Unplug, remove parts, wash/rinse/sanitize parts, and scrape food from surfaces. |
| What is the difference between disinfectants and sanitizers? | Disinfectants destroy or inactivate bacteria and fungi, while sanitizers reduce pathogens to safe levels. |
| What temperature must high-temperature dishwashers reach for sanitizing? | At least 180°F (82°C). |
| What are the steps for manual dishwashing in a three-compartment sink? | Scrape items, wash in the first sink, rinse in the second sink, sanitize in the third sink, and air-dry. |
| How should clean and sanitized tableware be stored? | At least six inches off the floor, with glasses and cups upside down. |
| What are the two types of wiping cloths used in cleaning? | Wet wiping cloths and dry wiping cloths. |
| What is the proper way to store cleaning tools and chemicals? | In a separate area away from food and prep areas, with good lighting and hooks for hanging. |
| What must be included on a chemical label? | Directions for use and must be clear enough to read. |
| What information do Safety Data Sheets (SDS) provide? | Safe handling information and emergency steps for each chemical. |
| What is the first step in developing a cleaning program? | Create a master cleaning schedule. |
| What should a master cleaning schedule identify? | What should be cleaned, who should clean it, when it should be cleaned, and how it should be cleaned. |
| What should be done if a cleaning solution becomes dirty? | Change the solution. |
| How often should cleaning tasks be checked against the master schedule? | Every day. |
| What should be done with cloths that contact raw meat, fish, and poultry? | Keep them separate from other cleaning cloths. |
| What is the purpose of training employees on cleaning procedures? | To ensure they follow the cleaning program effectively. |
| What should be done after using chemicals in foodservice? | Clean and sanitize equipment and utensils. |
| What is the minimum contact time for sanitizers? | Varies for each sanitizer. |
| What should be done if a binder of Safety Data Sheets is kept? | Review it periodically to ensure it is up to date. |