Help
Options
Didn't know it?
click below
click below
Knew it?
click below
click below
Don't Know
Remaining cards (0)
Know
retry
shuffle
restart
0:00
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
Volume 1 Test Ques.
Volume 1 CDC Multiple Choice 2A654
| Question | Answer |
|---|---|
| Which character of an Air Force specialty code (AFSC) identifies the skill level? | Fourth |
| A Control Air Force specialty code (CAFSC) identifies an | Airman’s highest usable skill in terms of total Air Force requirements |
| Which source provides the career knowledge training required for upgrade to the 5-skill level? | Career development course (CDC) |
| Who is responsible for a trainee’s skill-level upgrade? | Trainee |
| As an aircraft fuel system journeyman, you are expected to | troubleshoot components |
| As an aircraft fuel system journeyman, what are your duties regarding hazardous materials? | Handle, label, and dispose of them according to environmental standards |
| Responsibility and accountability for mission results rests with | wing commanders |
| What are the three types of wings? | Operational, air base, and specialized mission wings |
| Training wings and intelligence wings are examples of | specialized mission wings |
| Which group is concerned with the maintenance of air and space weapon systems? | Maintenance group (MXG) |
| To whom is the component maintenance squadron commander responsible for overall squadron management? | Maintenance group commander |
| The technical authority and advisor of maintenance production in a maintenance shop is the | section chief |
| Propellers are maintained by personnel assigned to the | propulsion flight |
| Off-equipment maintenance of electronic warfare systems is performed by the personnel assigned to the | avionics flight |
| Maintenance and repair of gaseous and cryogenic servicing units are performed by the personnel assigned to the | electro-environmental (E/E) flight |
| Responsibility for establishing procedures to clear repeat and recurring discrepancies rests with the | group commander |
| Responsibility for enforcing sound maintenance practices rests with the | squadron commander |
| Responsibility for reviewing, evaluating, and taking corrective action based on quality assurance (QA) and other inspection reports rests with the | section chief |
| Who approves local manufacture requests? | Maintenance group commander |
| Who ensures there is an orientation program developed for all newly assigned personnel? | Maintenance group commander |
| Personnel assigned to maintenance operations are responsible to the maintenance group commander for | the overall management of all functional areas |
| Who is responsible for the hour-by-hour execution of maintenance? | Maintenance operations center (MOC) |
| Responsibility for ensuring high-quality maintenance rests with | all maintenance personnel |
| Which of the following is a dynamic inspection system designed to improve aircraft combat capability? | Maintenance standardization and evaluation program (MSEP) |
| After you have performed maintenance or repair on an aircraft or equipment, quality assurance (QA) personnel conducts a | quality verification inspection |
| An over-the-shoulder evaluation of a technician or supervisor accomplishing a maintenance action by quality assurance (QA) personnel, is a | technical inspection |
| Which inspection requires skills, equipment, and facilities beyond your normal duties? | Programmed depot maintenance (PDM) |
| Which type of workcards may be authorized for use during contingencies? | Contingency decks |
| Which inspection concept is applicable to aircraft doing an immediate turnaround? | Thru-flight |
| Which inspection augments the basic post flight (BPO)? | Hourly post flight |
| Which inspection concept is performed when the aircraft returns from a long-range mission? | Home station check |
| An aircraft is examined with sufficient thoroughness to determine its mechanical fitness for flight and the completeness of its equipment and supporting documents during | an acceptance inspection |
| Which inspection is outlined in the –6 technical order (TO) and differs from other types of inspections in that only one part of the aircraft or item requires the inspection. | Special |
| During an inspection, when are all write ups found and documented? | Look phase |
| When you clear a discrepancy in Air Force technical order (AFTO) 781s, what is placed over the symbol? | Last name initial |
| Which symbol indicates an unsatisfactory condition exists but is not sufficiently urgent or dangerous to warrant discontinuing use of the equipment? | Red diagonal |
| Prior to performing maintenance, you review the Air Force technical order (AFTO) 781s to ensure | there are no potential safety hazards |
| To enter a warning note in the Air Force technical order (AFTO) Form 781A, Maintenance Discrepancy and Work Document, the word “NOTE” is entered in | red in the discrepancy block, followed by the remarks, which may be written red |
| On the Air Force Technical Order (AFTO) Form 781H, after refueling the aircraft, the person who performs or supervises the operation puts their name in block 14 using what format? | Minimum signature (first initial and last name) |
| What part of the Air Force Technical Order (AFTO) Form 244 provides a means to document a quality control review of the form? | Part IV, SUPERVISORY REVIEW |
| After a permanent repair on a fuel tank is accomplished, the Air Force Technical Order (AFTO) Form 427, Aircraft Integral Fuel Tank Repair Historical Data Document, is | maintained as historical data |
| What percentage of accidents is due to natural causes, such as lightning, storms, or floods? | Two |
| All these factors contribute to the indirect cost of an accident except | medical costs for injured person |
| Many accidents can be prevented by simply | keeping your work area clean and orderly |
| Which are the two types of distracters found in the workcenter? | External and internal |
| An accident has resulted in the hospitalization of three or more personnel. This mishap would be classified as | class B |
| What is the key factor in the creation of static electricity? | Motion |
| Which materials are used to make personnel static discharge plates? | Copper, zinc, or zinc-coated metal |
| Static-discharge plates should be mounted on the | entrance of the workstand |
| The purpose of bonding is to eliminate | differential in electrical charges between a component and the aircraft |
| What is the minimum safe distance from the jet engine exhaust? | 200 feet |
| What should you use to prevent other maintainers from inadvertent operation of devices such as landing gear and flight control surfaces? | Warning tags, AFTO Form 1492 |
| What type of communication may be used during ground refueling operations? | The aircraft intercommunication system |
| As a fuel system journeyman, what are your responsibilities concerning ground locks? | Ensure the ground crew has installed them before you begin work |
| Which precaution should you take when you are working near ejection seat catapults? | Avoid unintentional movement of the actuating mechanisms |
| Two major contributors of foreign object damage (FOD) are poor | work habits and housekeeping |
| Which is the most difficult class of foreign object damage (FOD) to control? | Stone |
| Which are two proven methods to control foreign object damage (FOD)? | FOD walks and FOD bags |
| What is the first thing you should do if your clothes become soaked with fuel or chemicals? | Leave the area and remove your clothes |
| During a refuel operation, you notice a small fuel leak. What is the first step you should take? | Stop the refuel operation |
| Which are the three hazards associated with compressed air? | Air pressure, flying, particles, and noise |
| Which of the following would not be on a compressed air safety checklist? | Use air in well ventilated area |
| As a minimum, a respirator fit-test must be accomplished for every respirator wearer initially and | then at least annually |
| Respirator training must be documented on an | Air Force Form 55 |
| Individually issued respirators should be cleaned and sanitized | at the end of the each day in which they were used |
| Respirators stored for emergency or rescue use must be inspected at least | monthly |
| Which footwear items are authorized for wear inside a fuel cell? | Static resistant or neoprene booties |
| When you’re applying solvents to an aircraft structure, you may wear | approved gloves |
| You must wear safety goggles when you’re | draining a fuel tank |
| What should you do to a self-contained emergency eyewash station before you begin any fuel systems maintenance? | Ensure the unit is filled with fresh water |
| Which is a complete listing of technical orders (TO) for a specific weapons system? | List of applicable publications (LOAP) |
| A job guide is an example of | an operations and maintenance (O&M) technical order (TO) |
| What type of operations and maintenance (O&M) technical order (TO) enables you to isolate a malfunctioning component? | Troubleshooting (TS) |
| What type of time compliance technical order (TCTO) is issued for conditions that could result in a fatality if not corrected? | Immediate action |
| Which time compliance technical order (TCTO) requires compliance within a specified time limit of one to ten days? | Urgent action |
| Which technical order (TO) gives detailed information on how to correctly complete Air Force technical order (AFTO) forms? | 00–20–1 |
| What type of technical order (TO) is mainly a work simplification device? | Abbreviated |
| What type of card set lists the inspection requirements from the –6 aircraft inspection technical order (TO)? | Inspection work cards |
| Which abbreviated technical order (TO) is meant to be followed step by step? | Checklists (CL) |
| What does the first number of a technical order (TO) designate? | Category |
| If the aircraft technical order (TO) number only has three parts, what does the third part identify? | Type |
| What does the fourth part of a Maintenance Integrated Data Access System (MIDAS) manual number identify? | Chapter number and subject matter |
| What does the fifth part of a Maintenance Integrated Data Access System (MIDAS) manual number identify? | Subsystem |
| What are the three authorized types of technical order (TO) improvement reports? | Immediate, Urgent and Routine |
| How are emergency technical order improvement reports submitted? | |
| Which type of technical order (TO) improvement report would be submitted for a deficiency that could cause injury to personnel or damage to equipment? | Urgent |
| Which of the following Air Force Technical Order (AFTO) Form 22 recommended changes (RC) require a response within 45 calendar days after receipt? | Routine |
| The Air Force Supply System is different from civilian supply systems because it | requires more flexibility |
| Which system allows logistics personnel, customers, and commanders to track every item in the supply system through standardized procedures? | Standard Base Supply System (SBSS) |
| Which supply element is the first point in the process of obtaining materiel from supply? | Demand processing |
| Who allocates the money to buy Air Force property? | Congress |
| The responsibility of a person to make good any loss, destruction, or damage of government property caused by misuse or negligence is known as what kind of liability? | Pecuniary |
| The repair cycle of a supply asset ends when the item is | sent back to supply as serviceable or unserviceable |
| Which form documents a repair action has been accomplished on a repair cycle item as a result of a maintenance turnaround (TRN)? | Air Force Technical Order (AFTO) Form 350 |
| Which fuel spill is considered a ground mishap, and requires response by the senior fire official on the installation? | Class III |
Created by:
Fuels92MXS
Popular Military sets