Save
Busy. Please wait.
Log in with Clever
or

show password
Forgot Password?

Don't have an account?  Sign up 
Sign up using Clever
or

Username is available taken
show password


Make sure to remember your password. If you forget it there is no way for StudyStack to send you a reset link. You would need to create a new account.
Your email address is only used to allow you to reset your password. See our Privacy Policy and Terms of Service.


Already a StudyStack user? Log In

Reset Password
Enter the associated with your account, and we'll email you a link to reset your password.
focusNode
Didn't know it?
click below
 
Knew it?
click below
Don't know
Remaining cards (0)
Know
0:00
share
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

  Normal Size     Small Size show me how

Current Measurements

Bio Med Tech course 1

QuestionAnswer
What is the symbol for Alternating current measurements in the milli amp or amp (unit) range? AC mA/A
What is the symbol for Alternating current measurements in the micro amp range? AC uA
What is the symbol for Direct current measurements in the milli amp or amp (unit)range? DC mA/A
What is the symbol for Direct current measurements in the micro amp range? DC uA
Where do you place the black lead when measuring current? In the common (COM) jack.
Where do you place the red lead when measuring current? In the corresponding amperage jack. When measuring A-amp (unit) measurements. And mA/uA when measuring in the milli or micro amp range
How do you measure current? The multimeter must be placed "IN" the circuit to measure current
In order for current to flow through the meter the circuit has to be? Broker (opened) and the meter inserted
Where do you place the red test lead in reference to the black test lead? Red test lead is placed at a point that is more positive than the black test lead.
What happens if the test leads are reversed on an analog meter? The analog meter's needle moves to the left, off the scale
What happens if the test leads are reversed on a digital meter? The meter will measure a negative value of current. Ignore the negative sign, the value is correct
What happens when a switch on the circuit is closed? Current will not flow through the meter
What happens when a switch on the circuit is opened? Current must pass through the meter
When making current measurements, the meter must be placed where? Must be placed in the series with the current path. Electrons in the path of measurement must flow through the meter.
Created by: 100000215936034
Popular Military sets

 

 



Voices

Use these flashcards to help memorize information. Look at the large card and try to recall what is on the other side. Then click the card to flip it. If you knew the answer, click the green Know box. Otherwise, click the red Don't know box.

When you've placed seven or more cards in the Don't know box, click "retry" to try those cards again.

If you've accidentally put the card in the wrong box, just click on the card to take it out of the box.

You can also use your keyboard to move the cards as follows:

If you are logged in to your account, this website will remember which cards you know and don't know so that they are in the same box the next time you log in.

When you need a break, try one of the other activities listed below the flashcards like Matching, Snowman, or Hungry Bug. Although it may feel like you're playing a game, your brain is still making more connections with the information to help you out.

To see how well you know the information, try the Quiz or Test activity.

Pass complete!
"Know" box contains:
Time elapsed:
Retries:
restart all cards