click below
click below
Normal Size Small Size show me how
CDC 2T251 Vol 1 Ed 2
Air Transportation Journeyman
Question | Answer |
---|---|
If you are performing duties in Air Force Specialty Code (AFSC) 2T251, Which Title describes you best? | Air Transportation Journeyman |
If you are performing anti-hijack inspections, which function are you performing? | Passenger Service |
If you are coordinating with other work centers to ensure the loading process runs smoothly and on time, which functions are you performing? | Air Terminal Operations Center |
If you are part of the the traffic management specialty in the transportation career field, which duties would you perform | Packaging, classifying, and arranging personal property for shipment or storage |
Which specialty does not fall under the transportation and vehile management career field? | Air Traffic Control |
Whic terms refers to the movement of personnel, units, supplies, and equipment from deployed positions within or between areas of responsibility | Sustainment |
Which command provides common-user and commercial air, land and sea transportation | USTRANSCOM |
Which command is the link between Department of Defense shippers and the commercial transportation carrier industry? | Surface Deployment and Distribution Command (SDDC) |
Which command is the US Transportation Command's single component command for air mobility and provides airlift, air refuleing, special air mission and aeromedical evacution services? | AMC |
Which agency serves as AMC strategic air operations hub and plans, directs, schedules, and tracks aircraft operations worldwide | TACC |
Through which system does the Air Force provide rapud global mobility to the defense transportation system | NAMS |
Which is a station that serves as an authorized port to process and clear aircraft and traffic for entrance into the country | APOD |
The coordinated use, synchronization, and sharing of two or more military departments logistics forces is called | Joint Logistics |
Which type of organization is created to accomplish missions with specific, limited objectives and is dissolved when no longer needed | Joint Task Force |
How many pallets can the C-17 hold in its aerial delivery system and its logistics rail system | 11 and 18 |
Which aircraft can hold up to six pallets and is capable of landing on dirt strips | C-130H |
Which pallet positions on a C-130H require safety aisles | 3,4, and 6 |
Which pallet positions on a C-130J require safety aisles | 4,5, and 8 |
A single pallet loaded in pallet position 5 on a c-130H can be a maximum of how many pounds | 8500 |
What is the Civil Reserve Air Fleet (CRAF) designed to do | Augment DOD airlift capability in times of war and president declared emergency |
Which stage of CRAF activation supports major regional conflicts or a major theater war | Stage II Defense Airlift Emergency |
If you are wearing eyeglasses and bulky uniform items with cords and string, what must you do before working around moving parts and machinery | Secure them to minimize hazard |
If you accidentally damage the Halvorsen loader by running into the concrete barriers on your way to load an aircraft, to whom should you report the damage to | Supervisor Immediately |
If you are driving a special purpose vehicle within 25 feet of an aircraft, what is the maximum miles per hour you can drive? | 5 |
If you are driving on the flight line, when is it authorized to come between a taxing aircraft and follow me guide? | Never |
If you need to leave you vehicle unattended on the flight line, other than leaving the keys in the ignition with the vehicle unlocked, which actions are required? | Turn off ignition; place in reverse or park, set the parking brake and chock the front and back of one rear wheel |
If you are stopped on the flight line at night and your head lights are on, what should you do if an aircraft is taxiing towards your area | turn your headlights off and your emergency flashers on instead |
If you are crossing the active runway and see a flashing white light signal, what action should you take | Return to the starting point |
If you are crossing the active runway and see a flashing red light signal, what action should you take | Clear the active runway |
If you are crossing the active runway and see a steady red ligt signal, what should you do | STOP! Your vehicle will not be moved |
If you are crossing the active runway and see a red and green light signal, what should you do | General Warning: Exercise extreme caution |
When planning and scheduling work assignements and priorities, what must you do when you discover a piece of equipment is out of commission and it will affect your ability to perform the mission | Find out what is wrong with it, when it will be fixed, and notify your chain of command |
When assigning personnel to work crews, which of the following is not a consideration? | assigning them to the same duties everyday |
Once you have assigned people to various work crews, you must ensure that they know | exactly who is filling which role and what you expect from each member |
Your supervisor referred you to the DTR to look up information about joint inspection procedures, After locating the DTR through the AF Portal, in which part of the DTR do you look? | Part III |
You are working in the passenger terminal helping a customer determine if he and his family are allowed to fly space-available on a DOD-aircraft. In which publication would you look | DOD 4515.13R Air Transportation Eligibility |
You are searching for the publication titled Preparing Hazardous Materials for MIL Air shipment and are at the menu of the AF Pubs where they are functionally grouped. Now you select | 24-series pubs link and locate the AF Manual |
A co-worker wants help determining if two pieces of Haz cargo are compatible with each other. What pub would you look? | AFMAN 24-204(I) |
You want to find out if the 36M2-3-45 TO is still current, which TO do you look? | AF TO Catalog |
You are loading tanks on a C-17 aircraft and want to find specific loading procedures for these items. Which section of the 1C-17A-9 TO would you refer to? | Section VI |
In the aircraft -9 series TO, the loading procedures in which section have precedence over instructions in section IV? | Section VI |
Which vol of the USAF War and MObilization Plan provides the basis for planning and pre-positioning of WRM | WMP-4 |
JOPES is both a process and a collection of automated computer systems used to develop | OPLAND and time phased force and deployment data (TPFDDS) |
Which imprortant part of the time-phased force and depolyment data is identified by a five digit alphanumeric code | UTC |
WRM is equipment and other resources, authorized for wartime to maximize war-fighting capability, that are positioned as | swing stock and starter stock or a combo of both |
The benefit of pre-positioning war reserve material is | reduce the amount of time, resources, and effort it takes to transpoer equipment to the necessary locations during combat operations |
Which 463L pallets and nets are designated as WRM | Only 463L pallets and nets required for movement of other WRM assets |
If youare tasked to manifest, transport, and load passengers, to which deployment work center would you be assigned | |
If many passengers are departing from their own home station or the installation is designated as an APOE, the PDF can establish what to manifest, transport, and load passengers? | APT |
If you, as a CDF rep. have directed the deploying unit to move from the marshalling area, to which area will they move | Alert Holding Area |
If you, as a CDF rep. have directed the deploying unit to move from the alert holding area, to which area will they move | Call Forward Area |
If you are performing a JI in the CDF, in which area of activity are you working? | Call Forward Area |
During a JI, if the deploying unit cannot correct discrepancies with their cargo right away, to what are will you send the cargo until corrected | Frustrated Cargo Area |
If you are directing aircraft loading and supervising load team members in the CDF, which area are you working | Ready line/loading ramp area |
If the deploying unit can no longer make changes to the cargo, which CDF area is it located | Ready line/loading ramp area |
After a JI is complete, copies of the DD Form 2133 are distributed to Deploying unit rep, mobility force inspector and aircraft loadmaster; Copies do not go to who? | Installation deployment Officer |
When completing the heading information on the DD form 2133, what info is entered in Block 6 "Start time" | The local time the JI actually started |
Before a deploying unit can claim their cargo is exempt from inspection due to sight-sensitivity, they first must receive approval from | the service or major command having operational control of the aircraft |
During a joint inspection, after the deploying unit corrects an item previously found to have discrepancies, you will identify that on the DD Form 2133 by | Circling the X |
Before a vehicle can be accepted for airlift on a C-17 with 3/4 tank of fuel, the deploying unit must have | Chapter 3 authorizations |
Before a vehicle can be accepted for airlift on a KC-10 with 3/4 tank of fuel, the deploying unit must have | Vehicles on KC-10 are never allowed to carry 3/4 tank of fuel |
Before any DOT 5L jerrican can be accepted for airlift, they must be | completely drained of fuel |
Before a vehicle with an accompanying load can be accepted for airlift during a joint inspection, its cargo must be restrained with a minimum of | 1/2 in diameter rope |
During a JI, if a pallet is dirty and the dirt cannot be swept off, what must occur before the pallet can be accepted for airlift | the deploying unit must steam clean and/or power wash it |
During a JI, before a pallet can be accepted for airlift, what must you ensure in terms of dunnage requirements | Three pieces, each measuring 4X4 X 88 and made of proper material, accompanies each pallet |
After HI is complete, who signs the DD form 2144 | The deploying unit rep and the qulaified mobility force inspector |
Which type of airdrop requires no parachute | Freedrop |
Which type of airdrop requires stabilization parachutes to hold the loads upright | High Velocity |
Which method of airdrop begins with a 15 ft drogue parachute deploying and ends with the main cargo parachute deploying after the platform exits the aircraft | Extraction |
What is the capacity of the 7A cargo sling when three straps are used | 400 LBS |
What is the capacity of the A-22 cargo bag | 2200 LBS |
What is the maximum and minimum drop weights of the Type V airdrop platform | 42,000 and 2500 |
Each ring on the Type V airdrop platform can restrain up to how many pounds | 5000 |
Which parachute will support between 501-2200 pound drop weight | G-12E |
Which parachute has a drop capacity of 200-500 pounds | G-14 |
Which parachute can produce a drag of up to 28,000 pounds | Extraction |
Which form will you use as a guide throughout the veh insp process | AF Form 1800 |
The purpose of the before-operation vehicle inspection is to ensure | the vehicle is safe and in commission before you operate it |
Which information are you required to put in designated shift/signature block of the AF Form 1800 once you complete inspection | Last Name only |
Which forflift is handy when working in tight spaces because its short wheelbase allows you to make tight turns | 4K |
Which forklift has a maximum lifting capacity of 10,000 and can lift up to 150 inches high | 10K |
When approaching the ramp for final positioning, what feature of the 10K forklift should you use to have smooth, positive control | Inching pedal |
How do you position the tines when parking | Tilt the mast so the tines are level with the ground and lower the forks flat |
Which K-loader has a deck range from 39-156 inches and can be used to load all aircraft except the KC-10 and the main cargo floors of the B-747 and DC-10 | 25K |
Which cab controls on the Tunner are used to operate the deck functions when on/off loading cargo | The deck and conveyor control panel |
Operating the starter continuously on the Tunner for longer than a minimum of how many seconds will cause it to overheat | 30 sec |
After cranking the starter on the Tunner for 30 sec without a successful start, allow the starter to cool down for how many minutes before trying again | 2 min |
In case of an engine failure or hydraulic pump failure when driving, the halvorsen has an electrically powered hydraulic pump within the hydraulic system that instantly and automatically operates for how many secs | 30 |
In which part of a veh inspection on a bus would you check to make sure the emergency door is operational, including the warning buzzer, and that nothing is blocking it | During operation |
In which part of a veh inspect will you clean and refuel the bus, if necessary, and ensure passengers did not damage any part of the bus interior | After Operation |
At least how far away from an aircraft should you adjust the staircase truck stairs to the desired height before proceeding | 10 Feet |
Which feature of the baggage conveyor is portable, allowing you to carry it into the belly of the aircraft | Front Control |
Which feature of the baggage conveyor minimizes baggage from falling off the belt | Guide Rails |
How do you know when the waste tank on the lavatory service truck is full | look through the sight window |
which feature of the lav truck measures the amount of rinse-fill solution being pumped inside of an aircraft or ATGL | Flow Meter |
Which feature on the portable water truck pump compartment must you always make sure is zeroed out before use | The Meter |
Before operating the water pump on the potable water truck, you must ensure the tank contains at least how many gallons | 40 gallons |
What towing mistake can easily bend or break trailer tongues and render the equipt untransportable | Jack-knifing |
How fast you can tow equipt depends of what factors | the type of equipt and how many you are towing only |
Which part of a pintle hook assembly will be used in all pintle hook towing operations | Safety/cotter pin |