Lab Instrumentation1 Word Scramble
|
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
| Question | Answer |
| 3 factors that contribute to the cost of automation | maintenance, personnel training, analyzer cost |
| lab characteristics used to justify the cost of automation | lab size, workflow, specimen volume, safety advantages |
| Ordering automation | electronic orders, standing orders, generated bar-codes with important patient info |
| Transportation automation | P-tube, track systems |
| Receiving automation | LIS |
| Reporting results automation | can go directly into clinician electronically, results can go to medical records to be apart of patients chart |
| Maintenance of quality across all aspects of the testing process | quality assurance |
| purpose of quality assurance | to evaluate the system and prevent errors |
| Which phase of testing accounts for the most laboratory error and why | Pre-analytical because there's less automation for this and we see an increase with human error |
| What is the purpose of quality control material | provides us with insight on how the analyzers are functioning and the accuracy of the test results |
| why liquid QC over lyophilized | more stable and decreases pipetting errors during reconstitution |
| analyzed by the manufacturer so the concentration of the analyses they contain is known | assayed QC |
| concentration of the analyses is unknown and must be determined by the lab | unassayed QC |
| When is it necessary to repeat QC material | maintenance is done, something is suspected to be wrong, reagent lot change, major component replacement |
| A sudden change due to an analyzer malfunction | shift |
| a gradual change due to reagent deterioration | drift |
| What steps do you need to take in evaluating a failed QC run | rerun once, ask questions, contact service technician if problem is not resolved |
| concentration of a substance is proportional to the amount of light absorbed | beers law |
| measures the intensity of light at selected wavelength | absorbance spectrophotometry |
| two factors that quantitative measurement using absorbance spectrophotometry depend on | color, intensity of the color |
| examples of monochromator in modern technology | filters, prism, grating |
| two types of photoelectric cells | barrier layer cell, photomultiplier tubes |
| measure light reflected from the surface of a colorimetric reaction | reflectance spectrophotometry |
| Name the layers in dry-slide technology | spreading, scavenger, reagent, indicator, support layer, spectrophotometer |
| sample is distributed evenly | spreading layer |
| filters out substances that could interfere with results | scavenger layer |
| reagent reacts with sample | reagent layer |
| reacted sample collects for spectral analysis | indicator layer |
| optical interface | support |
| measures the absorption of light by an element in its ground state | atomic absorption spectrometry |
| example of a lab test performed using atomic absorption spectrometry | determining blood lead levels |
| Valence electrons from some substances are able to absorb light energy, exciting the electron, electron returns to ground state and gives up energy as a photon of light which results in a fluorescence emission | fluorometry |
| compounds that can re-emit light upon excitation; produces color in testing | fluorochromes/fluorophores |
| commonly used fluorescent dye in the lab | fluorescein isothiocyanate (green) |
| two ways light scatter is measured | turbidimetry, nephelometry |
| Which form of light scatter is more sensitive | nephelometry because more light is scattered than transmitted |
| the measurement of the reduction of light transmitted through a solution caused by particle formation | turbidimetry |
| test done by turbidimetry | PT/INR; clot formation |
| the measurement of scattered light by a particulate solution | nephelometry |
| lab test performed by nephelometry | antibody-antigen reactions (rheumatoid factor) |
| impedance-based technology that is used to analyze cells | flow cytometry |
| Four main component of a flow cell cytometer | cells, illumination, fluidics, detectors/electronics |
| sample cell suspension is injected into the center of a rapidly flowing stream to pass the sample through the analysis point one at a time | hydrodynamic focusing |
| what is forward scatter | lenses collect light and focus it on a photodiode and the light is converted to electrical current; measures cell size |
| what is side scatter | uses wavelength-specific mirrors and filters to transmit light specific to the wavelength of the dye that is used; measures cell complexity |
| lab test performed by flow cytometry | immunophenotyping cells |
| radiation detector that counts radioactive labels | scintillation counter |
| disadvantages of RIA | lot of radioactive waste, short shelf life of radioactive isotopes |
| what replaced RIA | Chemiluminescence |
| what are immunoassays used to measure | antibody-antigen reactions |
| liquid phase and require no wash step, competitive format | homogenous assay |
| has solid phase, requires a wash step and can be competitive or non | heterogenous assay |
| 3 categories of immunoassay labels | enzymes, fluorogens, chemiluminescent |
| What are the two main classifications of radiation | ionizing and non |
| examples of ionizing radiation | microwave and radio |
| examples of non-ionizing radiation | x-rays and gamma |
| difference btwn electromagnetic radiation and particulate radiation | electromagnetic carries no charge while particulate are charged particles (alpha and beta) |
| what makes an atom radioactive | unbalanced protons and neutrons = unstable nucleus |
| Three types of decay an atom can undergo | alpha, beta, gamma |
| unstable nucleus gives up 2 protons and 2 neutrons which leads to an atomic mass and number change | alpha |
| ejects and electron, converting a neutron to a proton which leads to an atomic number change but the same mass | beta |
| what would stop alpha radiation | paper |
| what would stop beta radiation | block of wood |
| what would stop gamma radiation | lead |
| what type of radiation is emitted from a patient undergoing testing in nuclear medicine | gamma |
| four examples of how we use radiation in the clinical lab | radioimmunoassays, x-rays, MRI, CT |
| what assay is used in the echo analyzer | capture assay |
Created by:
10209767480851378
Popular Clinical Skills sets