Key Terms from Chapter 3 LAN
Quiz yourself by thinking what should be in
each of the black spaces below before clicking
on it to display the answer.
Help!
|
|
||||
---|---|---|---|---|---|
show | 1,000,000,000 bits per second.
🗑
|
||||
1 kilobit per second (Kbps) | show 🗑
|
||||
1 megabit per second (Mbps) | show 🗑
|
||||
1 terabit per second (Tbps) - | show 🗑
|
||||
100 block | show 🗑
|
||||
100 pair wire | show 🗑
|
||||
25 pair wire | show 🗑
|
||||
show | Part of an organization’s cross-connect facilities, a type of punch-down block used for many years to terminate telephone circuits. It does not meet Cat 5 or better standards, and so it is infrequently used on data networks.
🗑
|
||||
alien cross talk | show 🗑
|
||||
show | A modulation technique in which the amplitude of the carrier signal is modified by the application of a data signal.
🗑
|
||||
amplifier | show 🗑
|
||||
show | A measure of a signal’s strength.
🗑
|
||||
analog | show 🗑
|
||||
attenuation | show 🗑
|
||||
show | A standard rating that indicates the diameter of a wire, such as the conducting core of a coaxial cable.
🗑
|
||||
show | A measure of the difference between the highest and lowest frequencies that a medium can transmit.
🗑
|
||||
baseband | show 🗑
|
||||
bend radius | show 🗑
|
||||
show | A system founded on using 1s and 0s to encode information.
🗑
|
||||
bit (binary digit) | show 🗑
|
||||
show | A standard for coaxial cable connectors named after its coupling method and its inventors.
🗑
|
||||
show | A coaxial cable connector type that uses a twist-and-lock (or bayonet) style of coupling. It may be used with several coaxial cable types, including RG-6 and RG-59.
🗑
|
||||
braiding | show 🗑
|
||||
broadband | show 🗑
|
||||
broadcast | show 🗑
|
||||
byte | show 🗑
|
||||
cable plant | show 🗑
|
||||
Cat | show 🗑
|
||||
Cat 3 (Category 3) | show 🗑
|
||||
Cat 4 (Category 4) | show 🗑
|
||||
Cat 5 (Category 5) | show 🗑
|
||||
Cat 5e (Enhanced Category 5) | show 🗑
|
||||
Cat 6 (Category 6) | show 🗑
|
||||
show | A higher-grade version of Cat 6 wiring that further reduces attenuation and cross talk and allows for potentially exceeding traditional network segment length limits.
🗑
|
||||
show | A twisted pair cable that contains multiple wire pairs, each separately shielded then surrounded by another layer of shielding within the jacket.
🗑
|
||||
channel | show 🗑
|
||||
cladding | show 🗑
|
||||
coaxial cable | show 🗑
|
||||
show | The pipeline used to contain and protect cabling. Conduit is usually made from metal.
🗑
|
||||
connectors | show 🗑
|
||||
core | show 🗑
|
||||
show | A twisted pair patch cable in which the termination locations of the transmit and receive wires on one end of the cable are reversed.
🗑
|
||||
show | A type of interference caused by signals traveling on nearby wire pairs infringing on another pair’s signal.
🗑
|
||||
show | A type of connector with nine pins that’s commonly used in serial communication that conforms to the RS-232 standard.
🗑
|
||||
show | A type of connector with 25 pins that’s commonly used in serial communication that conforms to the RS-232 standard.
🗑
|
||||
show | A device, such as a multiplexer or modem, that processes signals. DCE supplies a clock signal to synchronize transmission between DTE and DCE.
🗑
|
||||
demarcation point (demarc) | show 🗑
|
||||
demultiplexer (demux) | show 🗑
|
||||
show | As opposed to analog signals, digital signals are composed of pulses that can have a value of only 1 or 0.
🗑
|
||||
show | Any end-user device, such as a workstation, terminal (essentially a monitor with little or no independent data-processing capability), or a console (for example, the user interface for a router).
🗑
|
||||
DWDM (dense wavelength division multiplexing) | show 🗑
|
||||
EMI (electromagnetic interference) | show 🗑
|
||||
show | The facilities necessary for a service provider (whether it is a local phone company, Internet service provider, or long-distance carrier) to connect with another organization’s LAN or WAN.
🗑
|
||||
F-type connector | show 🗑
|
||||
FDM (frequency division multiplexing) | show 🗑
|
||||
show | A short tube within a fiber-optic cable connector that encircles the fiber strand and keeps it properly aligned.
🗑
|
||||
fiber-optic cable | show 🗑
|
||||
FM (frequency modulation) | show 🗑
|
||||
show | The number of times that a signal’s amplitude changes over a fixed period of time, expressed in cycles per second, or hertz (Hz).
🗑
|
||||
show | A type of transmission in which signals may travel in both directions over a medium simultaneously. May also be called, simply, “duplex.”
🗑
|
||||
half-duplex | show 🗑
|
||||
show | A measure of frequency equivalent to the number of amplitude cycles per second.
🗑
|
||||
show | A junction point between the MDF and concentrations of fewer connections- for example, those that terminate in a telecommunications closet.
🗑
|
||||
impedance | show 🗑
|
||||
latency | show 🗑
|
||||
show | A connector used with single-mode or multimode fiber-optic cable.
🗑
|
||||
show | Also known as the main cross-connect, the first point of interconnection between an organization’s LAN or WAN and a service provider’s facility.
🗑
|
||||
show | A device that enables networks or segments using different media to interconnect and exchange signals.
🗑
|
||||
show | A type of fiber-optic cable that contains a core with a diameter between 50 and 100 microns, through which many pulses of light generated by a light emitting diode (LED) travel at different angles.
🗑
|
||||
show | A device that modulates analog signals into digital signals at the transmitting end for transmission over telephone lines, and demodulates digital signals into analog signals at the receiving end.
🗑
|
||||
show | A technique for formatting signals in which one property of a simple carrier wave is modified by the addition of a data signal during transmission.
🗑
|
||||
show | A connector used with single-mode or multimode fiber-optic cable.
🗑
|
||||
show | A device that separates a medium into multiple channels and issues signals to each of those subchannels.
🗑
|
||||
show | A form of transmission that allows multiple signals to travel simultaneously over one medium.
🗑
|
||||
show | Cross talk, or the impingement of the signal carried by one wire onto a nearby wire, that occurs between wire pairs near the source of a signal.
🗑
|
||||
show | The unwanted signals, or interference, from sources near network cabling, such as electrical motors, power lines, and radar.
🗑
|
||||
nonbroadcast point-to-multipoint transmission | show 🗑
|
||||
show | The degradation of a light signal on a fiber-optic network.
🗑
|
||||
show | The nondata information that must accompany data in order for a signal to be properly routed and interpreted by the network.
🗑
|
||||
patch cable | show 🗑
|
||||
patch panel | show 🗑
|
||||
show | A point or stage in a wave’s progress over time.
🗑
|
||||
show | The area above the ceiling tile or below the subfloor in a building.
🗑
|
||||
show | A data transmission that involves one transmitter and one receiver.
🗑
|
||||
point-to-multipoint | show 🗑
|
||||
populated segment | show 🗑
|
||||
punch-down block | show 🗑
|
||||
show | The process of retransmitting a digital signal. Regeneration, unlike amplification, repeats the pure signal, with none of the noise it has accumulated.
🗑
|
||||
show | A device used to regenerate a signal.
🗑
|
||||
RFI (radiofrequency interference) | show 🗑
|
||||
RG-6 | show 🗑
|
||||
show | A type of coaxial cable characterized by a 50-ohm impedance and a 10 AWG core. RG-8 provided the medium for the first Ethernet networks, which followed the now obsolete 10Base-5 standard.
🗑
|
||||
RG-58 | show 🗑
|
||||
RG-59 | show 🗑
|
||||
RJ-11 (registered jack 11) | show 🗑
|
||||
show | The standard connector used with shielded twisted pair and unshielded twisted pair cabling.
🗑
|
||||
rollover cable | show 🗑
|
||||
RS-232 (Recommended Standard 232) | show 🗑
|
||||
show | The length of time it takes for a packet to go from sender to receiver, then back from receiver to sender. RTT is usually measured in milliseconds.
🗑
|
||||
show | A connector used with single-mode or multimode fiber-optic cable.
🗑
|
||||
serial | show 🗑
|
||||
show | A cable, such as an RS-232 type, that permits serial data transmission.
🗑
|
||||
sheath | show 🗑
|
||||
show | A type of transmission in which signals may travel in only one direction over a medium.
🗑
|
||||
SMF (single-mode fiber) | show 🗑
|
||||
ST (straight tip) | show 🗑
|
||||
statistical multiplexing | show 🗑
|
||||
STP (shielded twisted pair) | show 🗑
|
||||
show | A twisted pair patch cable in which the wire terminations in both connectors follow the same scheme.
🗑
|
||||
structured cabling | show 🗑
|
||||
show | One of many distinct communication paths established when a channel is multiplexed or modulated.
🗑
|
||||
show | A method of multiplexing that assigns a time slot in the flow of communications to every node on the network and, in that time slot, carries data from that node.
🗑
|
||||
telecommunications closet | show 🗑
|
||||
show | An IEEE Physical layer standard for achieving a maximum of 10-Mbps throughput over coaxial copper cable. Thicknet is also known as 10Base-5. Its maximum segment length is 500 meters, and it relies on a bus topology.
🗑
|
||||
Thinnet | show 🗑
|
||||
throughput | show 🗑
|
||||
show | A device that transmits and receives signals.
🗑
|
||||
transmission | show 🗑
|
||||
transmit | show 🗑
|
||||
twist ratio | show 🗑
|
||||
twisted pair | show 🗑
|
||||
unpopulated segment | show 🗑
|
||||
show | A type of cabling that consists of one or more insulated wire pairs encased in a plastic sheath.
🗑
|
||||
vertical cross-connect | show 🗑
|
||||
show | The measurement used to describe the degree of pressure an electrical current exerts on a conductor.
🗑
|
||||
voltage | show 🗑
|
||||
wavelength | show 🗑
|
||||
show | A multiplexing technique in which each signal on a fiber-optic cable is assigned a different wavelength, which equates to its own subchannel.
🗑
|
||||
show |
🗑
|
Review the information in the table. When you are ready to quiz yourself you can hide individual columns or the entire table. Then you can click on the empty cells to reveal the answer. Try to recall what will be displayed before clicking the empty cell.
To hide a column, click on the column name.
To hide the entire table, click on the "Hide All" button.
You may also shuffle the rows of the table by clicking on the "Shuffle" button.
Or sort by any of the columns using the down arrow next to any column heading.
If you know all the data on any row, you can temporarily remove it by tapping the trash can to the right of the row.
To hide a column, click on the column name.
To hide the entire table, click on the "Hide All" button.
You may also shuffle the rows of the table by clicking on the "Shuffle" button.
Or sort by any of the columns using the down arrow next to any column heading.
If you know all the data on any row, you can temporarily remove it by tapping the trash can to the right of the row.
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
Created by:
Leisac
Popular Computers sets