Busy. Please wait.

show password
Forgot Password?

Don't have an account?  Sign up 

Username is available taken
show password


Make sure to remember your password. If you forget it there is no way for StudyStack to send you a reset link. You would need to create a new account.
We do not share your email address with others. It is only used to allow you to reset your password. For details read our Privacy Policy and Terms of Service.

Already a StudyStack user? Log In

Reset Password
Enter the associated with your account, and we'll email you a link to reset your password.
Don't know
remaining cards
To flip the current card, click it or press the Spacebar key.  To move the current card to one of the three colored boxes, click on the box.  You may also press the UP ARROW key to move the card to the "Know" box, the DOWN ARROW key to move the card to the "Don't know" box, or the RIGHT ARROW key to move the card to the Remaining box.  You may also click on the card displayed in any of the three boxes to bring that card back to the center.

Pass complete!

"Know" box contains:
Time elapsed:
restart all cards
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

  Normal Size     Small Size show me how

BA/ Stan Check

Question bank for STAN Team checks

While running engines the "APU OIL HIGH TEMP" advisory light illuminates, what are the EPs 1. Shut down APU 2. Allow to cool 60 minutes. 3. Check oil level
While running engines you have an APU COMPARTMENT FIRE", what are the EPs 1. Confirm with fireguard 2. Pull--- APU Fire T-handle 3. FIRE EXT switch to RESERVE 4. FUEL PUMP switch--- OFF 5. APU CONTROL switch--- OFF
While running engine you have to ABORT ENGINE START, what are the EP's 1. ENGINE PCL--- OFF 2. IGNITION switch--- OFF 3. Press starter button (motor affected engine for 30 minutes) 4. DISENGAGE starter(pull down PCL)
While running engines, ENGINE STARTER DOES NOT DROP OUT, what are the EPs 1. DISENGAGE apropriate PCL 2. PULL--- STArT CONTROL circuit breaker 3. Secure APU.
While running engines, INTERNAL ENGINE FIRE, what are the EP's 1. Both ENG PCL's--- OFF 2. IGNITION switch--- OFF 3. Press starter button(on affected engine)
While running engines, EXTERNAL ENGINE FIRE, what are the EP's 1. Confirm with fireguard 2. Both ENG PCL's--- OFF 3. PULL--- T-handle 4. FIRE EXT switch--- MAIN 5. Portable fire extinguisher.
While running engines, the ROTOR BRAKE SLIPS, what are the EP's 1. Both ENG PCL's --- OFF 2. Rotor brake--- ON(maintain position) 3. Fix it!
At what TGT is an internal engine fire Above 540 C TGT
When starting engines when do you engage the PCL to Ground Idle 14% Ng
On startup, Starter should drop out at what Ng 52 to 65% Ng
Engine idle parameters: Oil pressure Between 22 and 55 psi
Engine idle parameters: Ng Stable at 67% Ng (+ or - 1%)N Ng's should match within 3%
Engine idle parameters: TGT TGT does not rise above 851 C
Rotor brake master cylinder Pressure 450 psi
Flotation system pressure 2700-3250 psi
APU accululator pressure 2700-3000 psi
Engine oil Mobil Jet 254
MGB, IGB, TGB oil 85734
Hydraulic fluid 83282
Created by: Benbejammin