Ch 18 #1-18 Word Scramble
|
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
| Question | Answer |
| Surface roughness | caused by improper mixing or application (spraying) |
| Surface waviness | caused from improper sanding or blocking of plastic filler or primer |
| Bleeding | the dye of an old finish/color comes to the surface after a new finish has been sprayed, usually reds |
| Blistering | usually caused by corrosion under the surface |
| Blushing | a problem that makes the finish turn milky |
| Dirt in finish | foreign particles dried in the paint film |
| Fisheyes | separation of the wet film being sprayed |
| Mottling | streaking or blotching of the color, usually with metallic finishes, caused by heavier film thickness or excessive wetting |
| Orange peel | paint roughness that resembles the skin of an orange |
| Peeling | caused by improper surface sanding or scuffing |
| Pin holes | air bubbles that rose to the surface of body plastic filler |
| Plastic bleed | through |
| Corrosion under finish | will cause the finish to blister or peel |
| Runs | when gravity produces a mass slippage of an overwet, thick film |
| Sag | a partial slipping down of the surface film created by film that is too wet and heavy |
| Undercoat show through | the color of the undercoat is seen through the topcoat |
| Water spotting | dulling of gloss in spots do to spots of water drying on a finish that did not thoroughly dry |
| Wet spots | a finish problem seen as off colored and or slow drying spots of various sizes |
Created by:
abogner105
Popular Automotive sets