Question | Answer |
Always wear eye_____________ | protection |
Use equipment with the instructor’s____________ | premission |
Use equipment only when the _________ is in the lab. | instructor/teacher |
________all accidents or injuries | report |
Do not use__________________ equipment | broken |
Never use equipment until you have been properly___________ in its use | trained |
Loose clothing can cause_______ | injury |
Long hair must be ___________ or covered with a cap | tie back |
No __________ should be worn in the lab | jelwery |
Never wear gloves except when handling _______lumber | rough |
Wear_____________ shoes or boots | closed |
Approved protection earmuffs should be worn around________ equipment | noisey |
A__________must be worn when working where there is dust | dust mask |
Finishing materials should only be used in well _________ areas | ventalated reas |
Always_________spilled materials | clean |
Used rags are to be kept in a covered ______container | metal |
Locate the _______________ and learn how to use them | fire extengishers |
Keep cabinet doors and drawers _______ | shut |
Never leave anything on the _________ that could be slipped on or tripped over | floor |
_____vises when they are not in use | close |
Workbenches should be kept__________and organized | clean |
Use a_______or a rag to clear away scraps and sawdust | brush |
Tools should be used only for what they are ___________ | designed for |
_____tools should be carried with the edge or point held down toward the floor | sharp |
A tool should always be held by the_______ | handle |
When you are finished with a tool return it to its__________________ | proper place |
Ask for_________when you need to handle large or heavy material | help |
Lift with your______ not with your back | knees |
Never handle __________equipment if your hands are wet or if you are standing on a wet floor | electrical |
Equipment with a ___________________ power cord should be reported to the instructor. It should not be used | frayed and/or broken |
Don’t yank on the power cord to disconnect a tool. Pull the________ | plug |
Use all the recommended _______and other safety devices when you operate power equipment | gaurds |
Always disconnect the power equipment before you make any major_____________ | adjustments |
Never adjust equipment while it is _______ | on |
When you turn off a machine, stay with it until it is _____________stopped | completely |
Before you use a machine, make sure the person who used it before you, has turned it off and it is completely _________ | stoped |
Don’t__________anyone while they are operating the equipment | distract |
Using tools and equipment requires your complete __________at all times | attention |
Always work at a _____speed | safe |
Never fool around or _____in the lab | play |