click below
click below
Normal Size Small Size show me how
general safety
| Question | Answer |
|---|---|
| Always wear eye_____________ | protection |
| Use equipment with the instructor’s____________ | premission |
| Use equipment only when the _________ is in the lab. | instructor/teacher |
| ________all accidents or injuries | report |
| Do not use__________________ equipment | broken |
| Never use equipment until you have been properly___________ in its use | trained |
| Loose clothing can cause_______ | injury |
| Long hair must be ___________ or covered with a cap | tie back |
| No __________ should be worn in the lab | jelwery |
| Never wear gloves except when handling _______lumber | rough |
| Wear_____________ shoes or boots | closed |
| Approved protection earmuffs should be worn around________ equipment | noisey |
| A__________must be worn when working where there is dust | dust mask |
| Finishing materials should only be used in well _________ areas | ventalated reas |
| Always_________spilled materials | clean |
| Used rags are to be kept in a covered ______container | metal |
| Locate the _______________ and learn how to use them | fire extengishers |
| Keep cabinet doors and drawers _______ | shut |
| Never leave anything on the _________ that could be slipped on or tripped over | floor |
| _____vises when they are not in use | close |
| Workbenches should be kept__________and organized | clean |
| Use a_______or a rag to clear away scraps and sawdust | brush |
| Tools should be used only for what they are ___________ | designed for |
| _____tools should be carried with the edge or point held down toward the floor | sharp |
| A tool should always be held by the_______ | handle |
| When you are finished with a tool return it to its__________________ | proper place |
| Ask for_________when you need to handle large or heavy material | help |
| Lift with your______ not with your back | knees |
| Never handle __________equipment if your hands are wet or if you are standing on a wet floor | electrical |
| Equipment with a ___________________ power cord should be reported to the instructor. It should not be used | frayed and/or broken |
| Don’t yank on the power cord to disconnect a tool. Pull the________ | plug |
| Use all the recommended _______and other safety devices when you operate power equipment | gaurds |
| Always disconnect the power equipment before you make any major_____________ | adjustments |
| Never adjust equipment while it is _______ | on |
| When you turn off a machine, stay with it until it is _____________stopped | completely |
| Before you use a machine, make sure the person who used it before you, has turned it off and it is completely _________ | stoped |
| Don’t__________anyone while they are operating the equipment | distract |
| Using tools and equipment requires your complete __________at all times | attention |
| Always work at a _____speed | safe |
| Never fool around or _____in the lab | play |