Question | Answer |
1. Always wear eye_____________. | Goggles |
2. Use equipment with the instructor’s ____________. | permission |
3. Use equipment only when the _________ is in the lab. | Teacher |
4.________all accidents or injuries. | Prevent |
5. Do not use__________________ equipment | broken |
6. Never use equipment until you have been properly___________ in its use. | trained |
7. Loose clothing can cause_______. | injuries |
8. Long hair must be ___________ or covered •with a cap. | tied back |
9. No __________ should be worn in the lab | jewelry |
10. Never wear gloves except when handling _______lumber. | rough |
11. Wear_____________ shoes or boots | closed |
12. Approved protection earmuffs should be worn around________ equipment. | noisy |
13. A__________must be worn when working where there is dust. | dust mask |
14.Finishing materials should only be used in well _________ areas. | ventilated |
15. Always_________spilled materials | clean up |
16. Used rags are to be kept in a covered
______container. | flame proof |
17. Locate the _______________ and learn how
to use them. | Fire extinguisher |
18. Keep cabinet doors and drawers _______. | closed |
19. Never leave anything on the _________ that
could be slipped on or tripped over. | ground |
20._____vises when they are not in use | closed |
21. Workbenches should be kept__________and
organized. | clean |
22. Use a_______or a rag to clear away scraps
and sawdust. | brush |
23. Tools should be used only for what they are
___________. | made for |
24. _____tools should be carried with the edge
or point held down toward the floor. | sharp |
25. A tool should always be held by the_______. | handle |
26. When you are finished with a tool return it to its__________________. | belongs |
27. Ask for_________when you need to handle
large or heavy material. | help |
28. Lift with your______ not with your back. | legs |
29. Never handle __________equipment if your
hands are wet or if you are standing on a wet
floor. | heavy |
30. Equipment with a ___________________
power cord should be reported to the instructor. It should not be used. | frayed |
31.Don’t yank on the power cord to disconnect a
tool. Pull the________. | plug |
32. Use all the recommended _______and other
safety devices when you operate power
equipment. | procedures |
33. Always disconnect the power equipment
before you make any major_____________. | changes |
34. Never adjust equipment while it is _______. | on |
35. When you turn off a machine, stay with it
until it is _____________stopped. | completly |
36. Before you use a machine, make sure the
person who used it before you, has turned it off
and it is completely _________ | stopped |
37. Don’t__________anyone while they are
operating the equipment. | disturbed |
38. Using tools and equipment requires your
complete __________at all times. | attention |
39. Always work at a _____speed | safe |
40. Never fool around or _____in the lab. | play |