click below
click below
Normal Size Small Size show me how
safety
| Question | Answer |
|---|---|
| 1. Always wear eye_____________. | Goggles |
| 2. Use equipment with the instructor’s ____________. | permission |
| 3. Use equipment only when the _________ is in the lab. | Teacher |
| 4.________all accidents or injuries. | Prevent |
| 5. Do not use__________________ equipment | broken |
| 6. Never use equipment until you have been properly___________ in its use. | trained |
| 7. Loose clothing can cause_______. | injuries |
| 8. Long hair must be ___________ or covered •with a cap. | tied back |
| 9. No __________ should be worn in the lab | jewelry |
| 10. Never wear gloves except when handling _______lumber. | rough |
| 11. Wear_____________ shoes or boots | closed |
| 12. Approved protection earmuffs should be worn around________ equipment. | noisy |
| 13. A__________must be worn when working where there is dust. | dust mask |
| 14.Finishing materials should only be used in well _________ areas. | ventilated |
| 15. Always_________spilled materials | clean up |
| 16. Used rags are to be kept in a covered ______container. | flame proof |
| 17. Locate the _______________ and learn how to use them. | Fire extinguisher |
| 18. Keep cabinet doors and drawers _______. | closed |
| 19. Never leave anything on the _________ that could be slipped on or tripped over. | ground |
| 20._____vises when they are not in use | closed |
| 21. Workbenches should be kept__________and organized. | clean |
| 22. Use a_______or a rag to clear away scraps and sawdust. | brush |
| 23. Tools should be used only for what they are ___________. | made for |
| 24. _____tools should be carried with the edge or point held down toward the floor. | sharp |
| 25. A tool should always be held by the_______. | handle |
| 26. When you are finished with a tool return it to its__________________. | belongs |
| 27. Ask for_________when you need to handle large or heavy material. | help |
| 28. Lift with your______ not with your back. | legs |
| 29. Never handle __________equipment if your hands are wet or if you are standing on a wet floor. | heavy |
| 30. Equipment with a ___________________ power cord should be reported to the instructor. It should not be used. | frayed |
| 31.Don’t yank on the power cord to disconnect a tool. Pull the________. | plug |
| 32. Use all the recommended _______and other safety devices when you operate power equipment. | procedures |
| 33. Always disconnect the power equipment before you make any major_____________. | changes |
| 34. Never adjust equipment while it is _______. | on |
| 35. When you turn off a machine, stay with it until it is _____________stopped. | completly |
| 36. Before you use a machine, make sure the person who used it before you, has turned it off and it is completely _________ | stopped |
| 37. Don’t__________anyone while they are operating the equipment. | disturbed |
| 38. Using tools and equipment requires your complete __________at all times. | attention |
| 39. Always work at a _____speed | safe |
| 40. Never fool around or _____in the lab. | play |