click below
click below
Normal Size Small Size show me how
Computer Har.Chap 9
Key Terms for Computer Hardware Chapter 9 (Stack 2)
Question | Answer |
---|---|
What does an interlaced display do? | A type of display in which the electronic beam of a monitor draws every other line with each pass, which lessens the overall effect of a lower refresh rate. |
What does an IR transceiver have to do with wireless communication? | Provides an infrared port for wireless communication. |
A IrDA (Infrared Data Association) transceiver is another name for? | Another term for an infrared transceiver. |
What does a isochronous data transfer do with data? | A method used by IEEE 1394 to transfer data continuously without breaks. |
What does an IRQ (Interrupt ReQuest) line device do? | A line on a parallel port. BIOS manages these request lines that are used by a device to hail the CP U asking for data to be processed, and you do not need to change this value. |
What does a isochronous data transfer...well transfer? | A data transfer method used by IEEE 1394 where data is transferred continuously without breaks. |
Whats a KVM (Keyboard, Video, and Mouse) switch used for? | A switch used to connect a single keyboard, mouse, and monitor to multiple computers. |
Whats is a LCD monitor described as? | A thin, flat monitor based on a technology that manipulates liquid crystals. |
Whats another term for a motherboard mouse? | Another term for a PS/2 mouse. |
What kind of port is an LPT (Line Printer Terminal) and were is it located? | A parallel port in device Manager. |
What can a native resolution do to a monitor? | The one resolution for an LCD monitor, which is the actual (and fixed) number of pixels built into the monitor. |
What kind of display is an noninterlaced? | A type of display in which the electronic beam of a monitor draws every line on the screen with each pass. |
What does a refresh rate do? | The process of periodically rewriting data, such as on dynamic RAM. |
Whats a resolution? | The number of pixels on a monitor screen that are addressable by software (example: 1024 x 768 pixels). |
What was a RGB (red, green, and blue) used for? | Used by older video cards and CRT monitors. RS-232c (Reference Standard 232 revision c or Recommended Standard 232 revision c): A serial port interface standard. |
What kind of port is an standard parallel port (SPP)and what does it do? | A standard port allows data to flow in only one direction and is the slowest of the three types of parallel ports. The standard parallel port is sometimes called a normal parallel port or a Centronics port. |
What does a Super VGA (SVGA) have to do with a monitor? | A monitor using a minimum refresh rate standard of 70 Hz, or 70 complete vertical refreshes per second. |
Whats a S-Video port used for? | A 15-pin video port used on a desktop or notebook computer to connect a projector. |
What does a touch screen have to do with a monitor? | An input device that uses a monitor or LCD panel as a backdrop for user options. Touch screens can be embedded in a monitor or LCD panel or installed as an add-on device. |
What does a UART (universal asynchronous receiver-transmitter) chip do? | A chip that controls serial ports. It sets protocol and converts parallel data bits received from the system bus into serial bits. |
How does VGA (Video Graphics Adapter) relate to a (RGB)? | The standard analog vide o method of passing three separate signals for red, green, and blue (RGB), which older video cards and CRT monitors use. |