click below
click below
Normal Size Small Size show me how
Safety Rules
| Question | Answer |
|---|---|
| Always wear eye_____________. | Protection |
| Use equipment with the instructor’s ____________. | permission |
| Use equipment only when the _________ is in the lab. | Teacher |
| ________all accidents or injuries | Report |
| Do not use__________________ equipment | Damaged/broken |
| Never use equiment untill you have been properly __________ in its use | Trained |
| loose clothing can cause _____________ | Injury |
| Long hair must be_____________ or covered with a cap | Tied back |
| No ____________ should be worn in the lab. | Jewury |
| Never wear gloves unless handeling ___________ lumber | rough |
| Wear __________ shoes or boots | Closed-toed |
| Approved protection earmuff should be worn around _________ equiment | loud |
| A _________ must be worn when working around dust. | Dust Mask |
| Finishing materials should be used in well____________ areas | Ventiled |
| Always __________ spilled materials | Claen up |
| Used rags are to be kept in a covered __________ container | Metal |
| Locate the __________ and learn how to use them | Fire extighshers |
| Keep cabinet doors and drawers ___________ | closed |
| Never leave anything on the__________ that could be slipped on or tripped on. | Floor |
| _______ vices when not in use | Close |
| workbenches should be kept ___________ and orginzed. | Clean |
| Use a _______ or a rag to clear away scraps and sawdust. | Brush |
| Tools should be used only for what they are ___________ for | Designed |
| ___ tools should be held with the edge or point facing down | Sharp |
| A tools should always be held by the _______ | Handle |
| when you are finshed with a tool return it to its _______ | Place |
| Ask for__________ when you need to handel heavy/large material | Help |
| Lift with your ______ not with your back | Legs |
| Never handel __________ equiment if your hands are wet or if your standing on wet floor | eletrical |
| Equiment with a ____________ power cord should be reportd to the insrtuctor. I tshould not be used | Damager/broken |
| Don't yank a power cord to disconnect the equiment. Pull the _________ | Plug |
| Use all the recommended ___________ and othe safety divices when you operate power equiment. | Gaurds |
| Always disconnectn the safety equiment before making any major __________ | Adjustments |
| never adjust equiment when its ___________ | Still going |
| when you turn off a machine and stay with it untill its __________ stopped | Completely |
| before you use a machine,make sur w the person that used it before you, has turned it off and is completely ________ | Stopped |
| Don't ______ anyone while they are operating equiment. | distract |
| Using equiment and tools reqiures your complete __________ the entire time. | Attention |
| Always work at a _________ speed | Safe |
| Never fool around or ______ inthe lab | Play |