click below
click below
Normal Size Small Size show me how
technology safety
muhammad w pd 4 th
| Question | Answer |
|---|---|
| Always wear eye______________ | protection |
| Use equipment with the instructor’s?_____ | instruction |
| Use equipment only when the _________ is in the lab. | instructor or teacher |
| ________all accidents or injuries. | report |
| Do not use__________________ equipment | broken or damaged |
| Never use equipment until you have been properly___________ in its use. | trained and learned |
| Loose clothing can cause_______. | serious injury |
| Long hair must be ___________ or covered | tied back |
| No __________ should be worn in the lab | coustumes, dress, or suit |
| Never wear gloves except when handling _______lumber. | hot or rough/shrap |
| Wear_____________ shoes or boots. | only |
| Approved protection earmuffs should be worn around________ equipment. | noisy |
| A__________must be worn when working where there is dust. | oxygen mask or dust mask |
| Finishing materials should only be used in well _________ areas. | veintilated |
| Always_________spilled materials. | clean up |
| Used rags are to be kept in a covered ______container. | well veintilated and dry |
| Locate the _______________ and learn how to use them. | machines |
| Keep cabinet doors and drawers _______. | closed |
| Never leave anything on the _________ that could be slipped on or tripped over. | floor |
| _____vises when they are not in use | closed |
| Workbenches should be kept__________and organized. | clean |
| Use a_______or a rag to clear away scraps and sawdust. | brush |
| Tools should be used only for what they are ___________. | designed for |
| _____tools should be carried with the edge or point held down toward the floor. | pointy and sharp |
| A tool should always be held by the_______. | the handle |
| When you are finished with a tool return it to its__________________. | they belong to |
| Ask for_________when you need to handle large or heavy material. | helps |
| Lift with your______ not with your back | legs |
| Never handle __________equipment if your hands are wet or if you are standing on a wet floor. | electrical |
| Equipment with a ___ power cord should be reported to the instructor. It should not be used. | damaged |
| Don’t yank on the power cord to disconnect a tool. Pull the________. | handle |
| Use all the recommended _______and other safety devices when you operate power equipment. | procedures |
| Always disconnect the power equipment before you make any major_____________. | adjustment |
| Never adjust equipment while it is _______. | still running |
| When you turn off a machine, stay with it until it is _____________stopped. | completelly |
| Before you use a machine, make sure the person who used it before you, has turned it off and it is completely _________. | stopped or secure |
| Don’t__________anyone while they are operating the equipment. | distract |
| Using tools and equipment requires your complete __________at all times | attention |
| Always work at a _____speed. | safe |
| Never fool around or _____in the lab. | playing. |