Help
Options
Didn't know it?
click below
click below
Knew it?
click below
click below
Don't Know
Remaining cards (0)
Know
retry
shuffle
restart
0:00
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
!!!!&!Block 16 - !4
PP Inspection Quiz #8
| Question | Answer |
|---|---|
| 1. The Angle of Attack is defined as the difference of the blade chord line and the relative wind. What two elements make up (define) relative wind? a. propeller blade angle and propeller RPM b. aircraft velocity and propeller blade angle c. aircraft velocity and propeller speed | c. aircraft velocity and propeller speed |
| 2. What would likely result from improperly torqued wooden propeller mounting bolts? a. An out-of-track condition b. Increased blade angle of 2 or more blades c. Lead and lag in the advancing blade | a. An out-of-track condition |
| 3. Which of the following determines oil and grease specifications for lubrication of propellers? a. Airframe manufactures b. Propeller manufactures c. Engine manufacturers | b. Propeller manufactures |
| 4. Select the Airworthiness Directive applicability statement which applies to an IVO-355 engine, serial number TS164, 2,100 hours' total time, 300 hours since rebuilding. a. Applies to all IVO-355 engines, serial numbers T8000 through T8300, having less than 2,400 hours' total time. b. Applies to all IVO-355 engines, serial numbers T8000 through T8900 with 2,400 hours or more total time. c. Applies to all 1.0. and TVl0-355 engines, all serial numbers regardless of total time or since overhaul. | a. Applies to all IVO-355 engines, serial numbers T8000 through T8300, having less than 2,400 hours' total time. |
| 5. Which system includes a supply tank, pump, stationary nozzle, and U-shaped channel also known as a slinger ring? a. Propeller de-icing system b. Propeller anti-icing system c. Propeller anti-torque system | b. Propeller anti-icing system |
| 6. FAA certificated A&P mechanics may. a. Approved for return to service a major repair for which they are rated b. Approve for return to service a minor alteration they have performed appropriate to the rating(s) they hold c. Supervise and approve a 100-hour inspection | b. Approve for return to service a minor alteration they have performed appropriate to the rating(s) they hold |
| 7. The aerodynamic force acting on a rotating propeller blade operating at a normal pitch angle tends to a. increase the pitch angle. b. bend the blades rearward in the line of flight. c. reduce the pitch angle. | a. increase the pitch angle |
| 8. If an annual inspection is completed on December 30, 2012, when will the inspection expire? a. December 1, 2013 b. January 1, 2013 c. December 31, 2013 | c. December 31, 2013 |
| 9. An aircraft was due for a 100-hour inspection at 1842 hours TTIS. If the inspection was performed at 1847 TTIS, at what TTIS is the next I 00-hour inspection due? a. 1947 TTIS b. 1900 TTIS C. 1942 TTIS | C. 1942 TTIS |
| 10. For aircraft operated under Part 91, which of the following records must be retained and transferred with the aircraft when sold? a. Records of maintenance, alteration, preventive maintenance, 100-hour, annual, and progressive inspections. b. Records of current status of applicable AD's, and date and time when recurring AD's are next due. c. Records of inspections performed in with CFR 14 Part 43 Appendix D. | b. Records of current status of applicable AD's, and date and time when recurring AD's are next due. |
| 11. What is the means by which the manufacturer notifies aircraft owners and other interested person of unsafe conditions and prescribes the condition under which the product may continue to be operated? a. Service Bulletins b. Aircraft Service Manuals c. Airworthiness Directives | a. Service Bulletins |
| 12. The inspection of engine parts during overhaul is divided into which three categories a. Visual and Structural NOT b. Visual, Burnishing, Filleting, and Structural NDT c. Visual, Structural NDT, and Dimensional | c. Visual, Structural NDT, and Dimensional |
| 13. Which of the following can inspect and approve an engine major repair for return to service? a. Certificated mechanic with a power plant rating. b. Certificated mechanic with airframe and power plant ratings . c. Certificated mechanic with inspection authorization. | c. Certificated mechanic with inspection authorization |
| 14. What is used to help prevent corrosion after flying? a. spray and coat the propeller with WD 40 b. the propeller should only be washed with mild soap and water c. use a rag dampened with engine oil | c. use a rag dampened with engine oil |
| 15. Where would you find the operating conditions that make a 100-hour inspection mandatory? a. 14 CFR Part 91 b. 14 CFR Part 65 c. 14 CFR Part 43 | a. 14 CFR Part 91 |
| 16. What is/are the appropriate action(s) concerning minor repairs made on certificated aircraft? 1. FAA Form 337 must be completed 2. Entries must be made in the aircrafts maintenance record 3. The owner of the aircraft must submit a record of all minor repairs to the FAA at least annually a. No. 2 and No. 3 b. No. 1 and No. 3 c. No. 2 | c. No. 2 |
| 17. The theoretical distance that a propeller advances longitudinally in one revolution is determined by: a. Slip b. Blade back c. Blade pitch d. Bade tip | c. Blade pitch |
| 18. Hartzell compact propellers have the pitch changing mechanism located where? a. internal and external b. external c. internal | c. internal |
| 19. Which regulation provides the airworthiness standards of an rotorcraft certified in the normal category a. 14 CFR Part 25 b. 14 CFR Part 23 c. 14 CFR Part 21 d. 14 CFR Part 27 | d. 14 CFR Part 27 |
| 20. What publication is used for guidance to determine whether a powerplant repair is major or minor? a. Technical Standard Orders. b. Federal Aviation Regulations, Part 43, appendix A. c. Airworthiness Directives. | b. Federal Aviation Regulations, Part 43, appendix A. |
Created by:
sampizzuto
Popular Aviation sets