Help
Options
Didn't know it?
click below
click below
Knew it?
click below
click below
Don't Know
Remaining cards (0)
Know
retry
shuffle
restart
0:00
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
Inspection
| Question | Answer |
|---|---|
| What type of an inspection may a certified a and p mechanic sign off on? | 100 hour inspection. |
| When may a mechanic perform an annual inspection? | When the obtain an IA. |
| When must an annual inspection be performed, if required for an aircraft? | within every 12 calendar months IAW 14 CFR PART 43 |
| What may be used as a checklist for 100hour/Annual inspection? | A list made by the mechanic as long as it conforms with the criteria laid out in CFR 14 part 43 appendix D and any criteria in the aircraft manufacturers maintenance manual. |
| When is a 100 hour inspection required? | Required for US registered civil aircraft operating IAW part 91, not operating under a continuous air worthiness program. Aircraft for flight instruction for hire. |
| What are the common causes of corrosion> | Dissimilar metals, Moisture ingress, Stress, Inproper surface coatings and sealants, Microbial growth, Chemical attack, Climate. |
| What are some forms of corrosion? | Dissimilar metal, Filiform, Pitting, Fretting, Intergranular, stress. Surface. |
| How can filiform corrosion be recognized? | A worm like pattern seen underneath coatings. |
| What areas are more prone to corrosion? | Landing gear, wheel wells, Flight controls, External surfaces, Exhaust trail, Battery areas, Engine inlet areas. Galley toilet. |
| What are the basic steps of corrosion removal and treatment? | Surface cleaning, coating removal, corrosion removal, neutralizing, coating restoration. |
| What are the proper tools for removing corrosion from anodized aluminum surfaces? | Non woven abrasive pads. |
| What type of agent is preferred for cleaning plastic surfaces such as windshields? | Soap and water. |
| What type of agent is preferred for removing oil or gasoline from tires or other rubber surfaces? | Soap and Water. |
| What are the privileges and limitations of a mechanic with regard to propellers? | May perform or supervise the maintenance, preventive maintenance excluding major repairs to, and major alterations of, propellers CFR14PART65 APP D. |
| What publication is needed to inspect an engine or airframe for conformity with specifications? | Aircraft Type Certificate data sheet. |
| Where do you find a list of life limited parts? | Aircraft/Engine maintenance manual. |
| Where can you find a list of information that is required for aircraft records after completion of 100 hour inspections? | 14 CFR 43.11 |
| When may a mechanic perform an annual inspection? | When properly rated and in possession of an Inspection Authorization. |
| When is the first 100 hour inspection due after discontinuing a progressive inspection program? | Within 100 hours after the first completed progressive inspection program item. |
| What are the privileges and limitations of a mechanic in regard to instruments? | May perform 100-hour inspections, remove and reinstall, correct markings on the outside of the glass, paint touch up and hardware replacement. May not overhaul or disassemble. |
| According to 14 CFR 65.81 a certified mechanic may not supervise maintenance, preventative maintenance or approve the return of service of an aircraft or appliance unless? | They have previously completed the task. |
| An annual inspection must be performed every __________ months. | 12 |
| An aircraft on a 100 hour inspection program is allowed to exceed the inspection time by _______ and still be legal to fly. | 10 hours. |
| Although only the ADs are required to be performed on the aircraft, it is not uncommon for _____________ to request SB's, service letters and vendor service publications be complied with? | operators. |
| The three reasons for performing a records review are? | Legality, airworthiness, adherence to regulations. (Regulatory, safety, responsibility). |
| The component _________________ in the aircraft records should match the corresponding component in the aircraft. | P/N and S/N. |
| Grease dirt and debris trap moisture which causes _____________ and ___________ between moving parts. | Corrosion and wear. |
| Regulations at 14 CFR 43.15 require a ______________ to be used when inspecting an aircraft. | Check list. |
| Any checklist used must at very least include the scope and detail of _________________ . | 14 cfr 43 |
| An annual inspection begins and ends with. | Engine run up. |
| Exhaust systems should be inspected closely for _____________ and corrosion in welds due to the danger of __________________________ from the cabin heating system. | Cracks, Carbon monoxide poisoning? |
| What type of inspection program can be used as an alternative to 100hour/annual inspection? | Progressive Inspection Program. |
| ___________________________ are items that, because of their time in service must be replaced with new or overhauled items. | Life Limited Parts. |
| What is the only Conformity inspection that may be supervised by an IA? | Progressive inspection. |
| What is the first step of an inspection that Part 43 Appendix D requires? | Before inspection remove or open all plates, access doors, fairings, cowlings. |
| Who may approve for return to service a progressive inspection phase check? | IA. |
| Does an aircraft under progressive inspection need a 100 hour inspection if the airplane is being used for flight instruction for hire? | YES. |
| An annual inspection begins and ends with _____________. | Logbooks. |
| The aircraft records for the engines, propellers, and airframe should be examined to compare the ________, _______ in the logbooks to the numbers actually on the aircraft. | P/N S/N. |
| Lines, hoses, and clamps should be inspected for ___________,_________,___________,___________. | Looseness, leaks, condition, flexibility. |
| A/an _______________ inspection program is an alternative to the 100 hour or annual inspection programs. | Progressive. |
| Pre inspection operational checks on commercial aircraft are performed to establish a baseline of __________ and ___________ for __________ ____________. | engine, systems, satisfactory performance. |
| When towing an aircraft, ______ ________ or ____________ are used to watch for obstructions and to help guide the tug driver. | wing walkers, observers. |
| The purpose of a ___________ __________ is to determine if an aircraft and its related components conform to a specified standard. | conformity inspection. |
| An _____________ ___________ inspection is required when an aircraft lands at a weight that is beyond the maximum weight limit. | overweight landing. |
| A hard landing inspection is carried out when a hard landing takes place _____________ the maximum design landing limits. | beyond. |
| A/an ________ _________ inspection is carried out when an aircraft collides with a bird or flock of birds. | bird strike. |
| In an AD compliance record the term NA by SA means? | Not applicable by serial number. |
| Name the types of inspections for aircraft operating under part 91. | 100 hour, Annual, Progressive, Continuous airworthiness maintenance program. |
| Under part 91.200 what items require periodic inspections? | Altimeters, Transponder, ELT. |
| Can an annual or 100 hour inspection be supervised? | No. |
| What frequency are altimeter and transponder inspection IAW 91.200 required? | 24 months. |
| What frequency are ELT inspections IAW 91,200 required? | 12 months. |
| Who may perform Altimeter , transponder and ELT periodic inspections IAW 91.200. | Altimeters and transponders must be performed by repair station, ELTS can be performed by appropriately rated mechanic. |
| Is incorporating an STC considered a major alteration? | Will be stipulated in the instruction of the STC |
| When incorporating an STC what must be done also if considered a major alteration? | Complete a 337. |
| If you incorporate and STC into an aircraft the STC is not approved for this is considered to be a? | Major alteration. |
| What must a part have to be installed into an aircraft. | TSO, PMA, Manufacturers production certificate. |
| When completing a logbook entry for an equipment change what also must be completed? | Update the weight and balance records and equipment list. |
| What must be provided to the owner after a 100 hour or annual inspection that failed inspection? | Discrepancy list. |
| What does TSO stand for? | Technical Standard Order |
| What does PMA stand for? | Parts Manufacturer Approval. |
Created by:
g153511
Popular Aviation sets