Save
Busy. Please wait.
Log in with Clever
or
show password
Forgot Password?
Don't have an account?  Sign up 
Sign up using Clever
or
Username is available taken
show password


Make sure to remember your password. If you forget it there is no way for StudyStack to send you a reset link. You would need to create a new account. Your email address is only used to allow you to reset your password. See our Privacy Policy and Terms of Service.

Already a StudyStack user? Log In

Reset Password
Enter the associated with your account, and we'll email you a link to reset your password.
focusNode
Didn't know it?
click below
 
Knew it?
click below
Don't Know
Remaining cards (0)
Know
0:00
edit
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

  Normal Size     Small Size show me how

AutoCAD Unit 1

Beginning Unit of AutoCAD

QuestionAnswer
A polar array creates new objects ____ In a circular pattern
DDE can be used in which direction? All
Does every drawing need a section view? Only if it is needed for clarity
Does the hatch angle matter in a section view? No
Double clicking on a text object allows you to change its layer No
From which direction does AutoCAD start measuring angles 3 o'clock
How can you change an object's properties? All
How do you select objects with a Crossing Selection? Draw a window from right to left
How do you select the last set of object(s) you selected Type P
How long is a line drawn from 1 4 to @4<5
How long is a line from 1 4 to 4
How many AutoCAD objects are in a rectangle? 1
How many layers should a drawing have? As many as are needed
How many points do you need to define for the rectangle command? 2
How many points do you need to draw a line using Absolute Coordinates 2
How many snap points does an object have? Depends on the object
How should you select objects when using the stretch command? With a crossing selection
If you draw a line at 270 degrees it will point ___ down
If you select a line and a rectangle and view the properties ____ You will see only limited properties
Is 300 degrees the same as -60 degrees in a drawing? yes
Is it important to have exactly vertical or horizontal lines Orthographic projection? Yes
Is Orthographic Projection just for mechanical drafting? No
Object tracking works only with ____ Any active Osnap
Objects are rotated around the ____ Base point
Panning allows you to ____ Move around the drawing at the same scale
Polar coordinates are used mostly for drawing...? yes
Pressing F when selecting objects will... Allow you to draw a fence
Pressing Shift while you are selecting will: Remove the next selected object from the set
Scaling objects makes them ____ Either Bigger and Smaller
Should you draw your sections views first? No
Should your views by aligned in Orthographic projection? yes
The distances set for a chamfer are ____ Sometimes different
The fillet command creates ____ Both Round and Sharp Corners
The origin of a drawing is at: 0
To invoke the Zoom command transparently type ____ Z
To move something four units to the rightwhat would be the 2nd point of displacement? @4
What does WCS stand for? World Coordinate System
What is the best way of drawing a rectangle? Using the Rectangle command
What should you pay close attention to when learning AutoCAD? The Command Line
When can you set the height of your text? When you are starting the Text command
When drawing in 2D what axis do you NOT work with?
When selecting objects pressing 'L' will:
When setting up Polar Tracking the Increment Angle ____
When using Object Snap Tracking you should turn on ____
When using the TRIM command which do you select first?
When you want to close the Properties palette ____ Click the X in the top left of the palette
Which is not a valid Zoom option? Next
Which keystrokes will UNDO a command CTRL + Z
Which of the following is NOT a way to enter coordinates in AutoCAD? Approximate
Which one of these will NOT start the Print command Alt+P
Which view should you draw first? The view with the most information
Why is the Hatch command used in section views? To show what area has been 'cut away'
Why should you use the Zoom tools? All
You should use Osnaps when you dimension ____ Always
Popular Computers sets

 

 



Voices

Use these flashcards to help memorize information. Look at the large card and try to recall what is on the other side. Then click the card to flip it. If you knew the answer, click the green Know box. Otherwise, click the red Don't know box.

When you've placed seven or more cards in the Don't know box, click "retry" to try those cards again.

If you've accidentally put the card in the wrong box, just click on the card to take it out of the box.

You can also use your keyboard to move the cards as follows:

If you are logged in to your account, this website will remember which cards you know and don't know so that they are in the same box the next time you log in.

When you need a break, try one of the other activities listed below the flashcards like Matching, Snowman, or Hungry Bug. Although it may feel like you're playing a game, your brain is still making more connections with the information to help you out.

To see how well you know the information, try the Quiz or Test activity.

Pass complete!
"Know" box contains:
Time elapsed:
Retries:
restart all cards