Help
Options
Didn't know it?
click below
click below
Knew it?
click below
click below
Don't Know
Remaining cards (0)
Know
retry
shuffle
restart
0:00
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
IAR
Airworthiness
| Question | Answer |
|---|---|
| What FAA order contains type certification project inspection procedures? | Order 8110.4 |
| Which FAA order contains airworthiness inspection procedures? | Order 8130.2 |
| What document is required to initiate the process to amend or modify an airworthiness certificate or operating limitations? | An Application for airworthiness certificate 8130-6 |
| U.S. aircraft registration requirements are located in: | 14 CFR part 47 |
| True or False: There are no specific size requirements for PMA markings, provided they are legible. | TRUE |
| Who must a DAR contact for delegation and special instructions before accepting any certification/inspection activity requested by the applicant? | Managing office |
| Deviations to FAA policy must be______________________. | In, Writing |
| Prior to appointment of a new designee, a determination that a need exists must be made by the _______________. | FAA |
| The Federal Aviation Regulation that speaks specifically to the duration of a designee’s authority is___________. | 14 CFR 183.15 |
| By signing the acknowledgement of responsibility, the designee is acknowledging that ____________. | Delegations are privilege, not a right. |
| ODA appointments may be issued with a duration of up to ______ years, at the discretion of the Organizational Management Team (OMT)? | 5 |
| Where are the function codes for Flight Standards Service appointed DARs (DAR-T) found in FAA Order 8100.8? | Chapter 15 |
| The Code of Federal Regulations divides airworthiness certificates into which two classifications? | Special and standard |
| FAA Order 8130.20 provides guidance to designees regarding ________. | Aircraft registration requirements |
| Maintenance Designees are limited to issuing what type of certifications? | Recurrent |
| A standard airworthiness certificate will remain effective as long as the aircraft is registered in the U.S. and __________. | Aircraft has a current inspection. |
| Prior to accepting an application for airworthiness certificate, you must verify what? | Verify the aircraft is registered to the applicant. |
| FAA policy describing procedures for issuing original/recurrent standard airworthiness certifications is located in what document? | FAA Order 8130.2 |
| Which paragraph of FAA Order 8100.8 covers the manufacturing designee's responsibility to safeguard FAA Form 8100-2, Standard Airworthiness Certificate? | 301 |
| If the aircraft does NOT meet requirements for standard airworthiness certification, you must write a letter to the applicant stating the reason(s) for the denial and ___________. | Forward the application and a copy of the denial letter to your FAA managing office. |
| When issuing a standard airworthiness certificate, what document is used to determine if the aircraft is eligible by category? | Type Certificate Data Sheet (TCDS) |
| Which appendix of FAA Order 8130.2 deals with issuing standard airworthiness certificates for new aircraft manufactured outside the United States? | E |
| When you deny a special airworthiness certificate, you must _____________. | Write a denial letter explaining the reasons for denial of the certificate. |
| What FAA Airworthiness Form is used for all original and recurrent certifications of aircraft in the special classification? | 8130-7 |
| Special airworthiness certificates for primary, restricted, light sport, and limited category aircraft are effective for what duration? | Unlimited provided the aircraft is maintained in accordance with 14 CFR, Parts 43 and 91 |
| To be considered airworthy, an aircraft being certificated in the experimental category must _________. | Be in a condition for safe operation. |
| 14 CFR, Part 45 requires a fireproof ID plate on all of the following experimental aircraft, except? | Exhibition |
| Nationality and registration marks must be ____. | Painted on the aircraft or affixed by any other means of permanence. |
| When amending a special airworthiness certificate (FAA Form 8130-7), operating limitations that were issued based on a previous edition of this order may be substituted for ______. | The current limitation as found in FAA Order 8130.2 |
| Which order gives current FAA policy regarding the issuance of replacement and amended airworthiness certificates? | FAA Order 8130.2 |
| What do you put in the Date block on a standard or special replacement airworthiness certificate? | An R followed by the original issue date |
| An aircraft is NOT eligible for a replacement airworthiness certificate when ________. | The original certificate has expired or been suspended or revoked. |
| What is entered in the Date block of a standard or special amended airworthiness certificate? | An A followed by the current date of issue |
| True or False: Before issuing an amended airworthiness certificate for an aircraft model change, you must submit FAA form 337(s) to AFS-750 | FALSE |
| What documents must you include in the file to be forwarded to AWC for issuance of a replacement airworthiness certificate? | "A copy of the replacement operating limitations issued A signed statement from the aircraft owner requesting a replacement. A copy of the replacement certificate issued" |
| When replacing a lost special airworthiness certificate (FAA Form 8130-7), what operating limitations are issued? | The exact limitations that were part of the lost certificate |
| Can an IAR issue a special flight permit other than in person? | NO |
| Procedures for issuing a special flight permit are located in which FAA Order? | 8130.2 |
| Special flight permit operating limitations are necessary to establish ___________. | Safe operation |
| Before the designee issues a special flight permit for large aircraft to which 14 CFR, Part 125 does not apply, the applicant must _____. | Select, identify, and use an approved inspection program specified in 14 CFR, Part 91.409 |
| Without exception, who is required to inspect an aircraft prior to issuance of a special flight permit? | Designee |
| In accordance with 14 CFR, Part 91.203, what must be displayed in an aircraft operating on a special flight permit? | FAA Form 8130-7 and attached operating limitations |
| An applicant for a special flight permit must submit an application in accordance with 14 CFR, Part 21.199 on what FAA form? | 8130-6 |
| Where would you look to find the definition of "Original" vs "Recurrent" airworthiness certifications? | 8130.2 |
| Where would you find instructions for processing a completed airworthiness file? X2 | The Gulfstream ODA Operations Manual (and Order 8130.2) |
| What Order defines the process used to hold an airworthiness certificate in suspense | 8130.2 |
| What information should be entered in FAA form 8130-6 Section III B (Airworthiness Directives) | The number and the date range listed on the cover of the latest Biweekly AD Supplement. For example, “2014-09, 04/21/2014-05/04/2014.” |
| Who may apply for an export airworthiness approval? | Any person |
| The special requirements of importing countries are found in what document? | AC 21-2, Appendix 2 |
| After the issuance of Form 8130-4, the ASI or designee must complete part _____ of Form 8130-1. | Part III - Approval |
| What form may have corrections and erasures and may be reused for export purposes? | AC 8050-72, Export Number Assignment Card (E-Card) |
| According to 14 CFR, Part 21.1, a "product" includes all of the following except | Articles |
| An export airworthiness approval for an aircraft is issued in the form of an Export Certificate of Airworthiness. That Export Certificate of Airworthiness does not authorize what? | The operation of the aircraft. |
| What FAA document would you use to find the function code authorizing a designee to issue Export Certificates of Airworthiness for aircraft? | 8100.8 |
| The Inspection AR’s signature must be in permanent ink on which FAA forms: | "Form 8100-2, Standard Airworthiness Certificate Form 8130-7, Special Airworthiness Certificate Form 8130-6, Application for Airworthiness Certificate" |
| Typing errors may not be corrected on the following forms: | Standard or special airworthiness certificates |
Created by:
william.gunnin
Popular Aviation sets