click below
click below
Normal Size Small Size show me how
IAR
Review Questions
Question | Answer |
---|---|
True or False: Oral applications may be made by anyone desiring to export an aircraft engine, propeller, or article. | TRUE |
What document is required to initiate the process to amend or modify an airworthiness certificate or operating limitations? | An application for airworthiness certificate 8130-6 |
True or False: Airworthiness certificates may be issued for an aircraft manufactured under a production certificate without further showing. | TRUE |
U.S. aircraft registration requirements are located in: | 14 CFR part 47 |
True or False: There are no specific size requirements for PMA markings, provided they are legible. | TRUE |
True or False: All Inspection AR functions must be accomplished within your company’s facilities, unless otherwise authorized by the ODA. | TRUE |
The privileges of a Gulfstream ODA Inspection AR are stated where? | Gulfstream ODA Operations Manual |
What is the purpose of a certification plan? | The applicant's intended means for showing that a product complies with applicable regulation. |
Can you approve data and/or return an aircraft to service as an Inspection AR? | NO |
What form do you use to record all IAR activities? | FAA Form 8100-1 |
What type of training do you have to attend as an AR? | FAA Training initial and recurrent every 36 months. Initial and recurrent ODA Training (Quarterly). Other FAA training or FAA standardization workshops as required by the OMT. |
Who within the ODA provides your oversight as an AR? | Enterprise Program Administrator responsible for PC ODA and/or Lead IAR |
When you have a conformity issue under the ODA, where do you seek guidance first? Second? | "ODA Manual, Lead IAR Lead AR and/or Enterprise ODA Program Administrator" |
Do you have an annual review under the ODA? | YES |
What is the purpose of conformity? | Verifies that part, install, etc. conform to type design and are safe for operations. |
How do you document an unsatisfactory condition on an FAA Form 8100-1? | List the number of items that were determined to be unsatisfactory in Block 12 of the form. Comments should be listed in Block 13. Reenter unsatisfactory conditions/nonconformities in Block 9 with corrective action described in Block 13. |
How do you resolve an unsatisfactory condition on an FAA Form 8100-1? | Once corrective action is completed, the unsatisfactory block is lined through and initialed |
Describe the process you would follow if you were going to conduct a conformity inspection of a detail part? | Receive Inspect Submit |
Describe the process you would follow if you were going to conduct a conformity inspection of an installation? | Receive Inspect Submit |
Do you feel that you could perform your AR activities without undue interference/ pressure from management outside of the Gulfstream ODA Office? | Yes |
Do you feel that you can perform your AR activities without undue interference/ pressure from the ODA Administrators? | Yes |
What types of special training have you attended that helps you be prepared for your AR appointment? | Initial and recurrent FAA training, initial and recurrent ODA training and OJT. |
Under 14 CFR, which Part prescribes the procedures for the ODA? | Part 183 Subpart D |
Which FAA Order establishes policy and procedures for Type Certification? | Order 8110.4 |
Which FAA Order establishes the procedures, guidance, and limitations of authority for any ODA? | Order 8100.15 |
Which Gulfstream document establishes the specific responsibilities and procedures for the Gulfstream ODA? | Gulfstream ODA Operations Manual |
Can you delegate your AR signature authority to another IAR? A DAR? | No |
Where you do you find current regulations and guidance? | FAA Website / DRS |
How often do Individual Designees submit summary activity reports to the ODA? | on a schedule determined by the ODA Manual (every quarter) |
The primary purpose of FAA designee initial and recurrent training is to ________________. | Promote Standardization |
A description of authorized functions that may be granted to ODA unit members is contained in what documents. | Order 8100.15 and Gulfstream ODA Operations Manual |
Conformity inspection is the process of verifying and documenting what? | That test articles, parts, assemblies, installations, and test setups conform to the design data. Verify that your aircraft conforms to its type design and is configured to your approved program and operations. |
Who may issue a request for conformity inspection _______. | Program Administrator |
What part of the TIA will you normally be required to complete? | Block 12 part 1 |
According to FAA Order 8110.4, who has the responsibilities to ensure the product conforms to the proposed type design date? | Applicant |
During the planning stages of a certification activity, who determines the need to conduct conformity inspections? | FAA engineering personnel |
The Type Inspection Authorization (TIA) is issued when the examination of the technical data required for Type Certificate (TC) indicates _________. | the product or part will meet regulatory requirements. |
True or False: When you conduct the conformity inspection, you should consider the amount of time required to conduct inspection. | FALSE |
The two FAA forms that may be used to make a request for conformity are the 8120-10 and the ___________. | FAA Form 8110-1 Type Inspection Authorization |
What FAA Order requires the ACO project engineer or authorized DER to disposition any non-conformities found as a result of conformity inspection on FAA Form 8100-1? | Order 8110.4 |
The Code of Federal Regulations divides airworthiness certificates into which two classifications? | Special and standard |
Prior to performing Inspection AR activity, what document must indicate your approved authorization? | Chart of Authority must be uploaded to the approved file sharing system |
What regulation describes the requirements for ODA? | 14 CFR part 183 |
Title 14, Code of Federal Regulations (14 CFR) refers to: | Aeronautics and Space |
The word “chapter” when used in 14 CFR § 21.17 refers to: | Chapter 1 - FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION |
Special Federal Aviation Regulations (SFAR) are: | Equivalent to a CFR, Issued for a specified period, Issued for a specific purpose |
True or False: Inspection ARs may be authorized by the ODA to conduct inspections necessary to determine that products and related articles conform to the type design data and are in a condition for safe operation. | True |
ODA AR designations are effective for how long? | An indefinite period of time |
True or False: A representative’s designation may be terminated upon a finding by the Gulfstream ODA that the AR did not properly perform their authorized duties. | True |
What FAA order contains type certification project inspection procedures? | Order 8110.4 |
On what FAA form are the majority of an AR’s inspections documented? | FAA Form 8100-1 |
Who should the AR contact for information and answers relative to their duties as an AR? Use your own words. | Lead IAR and/or ODA Program Administrator |
An application for a type certificate for other than a transport category aircraft is effective for: | 3 years |
True or False: Conformity to type design is considered attained when the required and proper components are installed and they are consistent with the drawings, specifications, and other data that are part of the type certificate. | True |
True or False: Type certificates are issued for aircraft, aircraft engines, and propellers. | True |
True or False: The final type inspection report ensures that all type inspection authorization requirements are completed, and all FAA regulations have been met. | True |
An application for a type certificate must show compliance with FAA requirements that were in effect when? | On the date of the application |
The administrator of the FAA is empowered to issue what? | Reasonable rules |
What must be presented to the FAA by the applicant for each aircraft engine or propeller presented for type certification? | A statement of conformity |
Definitions for specific words and phrases used throughout the Code of Federal Regulations may be found where? | 14 CFR part 1 |
The Code of Federal Regulations (CFR) is divided into: | 50 Titles |
Which FAA order contains airworthiness inspection procedures? | Order 8130.2 |
True or False: All Inspection AR functions must be accomplished within your company’s facilities, unless otherwise authorized by the ODA. | True |
The privileges of a Gulfstream ODA Inspection AR are stated where? | Gulfstream ODA Operations Manual |
If you are applying your signature to Form 8130-3 electronically, you must ____________. | have direct access to the product, part, or appliance you are conforming. |
Which date format is proper for use on FAA Form 8130-3? | dd/mmm/yyyy - The date must be in the following format: two-digit day, first three letters of the month, and four-digit year, for example, 03 Feb 2008. |
When entering the address in Block 4, what must be entered? | Physical address of the organization or facility for which the form is being issued |
When should the managing office submit Form 8130-13 to the geographic office in which the certification activity will be performed? | Before you perform any authorized functions |
How long may you be authorized to perform work outside your directorate geographic area before additional justification is needed? | 6 months |
Who must endorse Form 8130-13 for designees who perform certificate activities outside their directorate geographic areas? | Managing office |
What FAA order establishes policy and procedures for designees performing functions outside their geographic boundaries? | 8100.8 |
Export airworthiness requirements may be waived by who? | Foreign Civil Aviation Authority |
The FAA regulatory basis for export airworthiness approvals is: | 14 CFR part 21, subpart L |
The requested parts are not manufactured under either your firm’s PMA or TSO authorization. The parts are, however, produced under the same quality control system and are available in the facilities for inspection. Appropriate? | No |
Which FAA document identifies most special requirements for export of products to foreign countries? | AC 21-2 |
FAA Form 8130-3, Airworthiness Approval Tag, is a multipurpose form. As an AR, which side of the form would you complete for the export of either PMA or TSO articles? | Block 13 |
Which advisory circular contains export airworthiness procedures and special requirements? | AC 21-2 |
Request for Conformity RFC | 8120-10 |
Type Inspection Authorization TIA | 8110-1 |
M | Material - Verify documented traceability from raw material to the prototype part. |
P2 | Processes and Processing - "Is the process being operated in accordance with the process specification? Are any deviations recorded?" |
CM | Critical and Major Characteristics - Has the applicant inspected all of the critical and major characteristics and have a record of it. |
T | Tooling - Calibration Records, Are tools used to produce prototype approved. |
W | Workmanship - Does the workmanship contribute to the quality of the product and be duplicated |
I | Adequacy of Inspection Records - Is there enough inspection points to verify 100% inspection by applicant. |
S | Software - Are all Software products at proper Revision level per hardware and software engineering Drawings, and do they power up and initialize. |
D | Adequacy of Drawings - Can the part be produced and inspected using the data on the drawing. |
MRA | Material Review Action - Is procedures adequate to ensure disposition for non-conformities. |
P3 | Previously Produced Parts - Verify parts have been verified for previous Material Review Action. Non-conforming parts should not be used unless they are reinspected. |
Where would you find the detailed instructions for completion of FAA Form 8130-3, Airworthiness Approval Tag? | FAA Order 8130.21 |
What publication provides guidance to a designee who is working export airworthiness approvals with the European community | "TECHNICAL IMPLEMENTATION PROCEDURES (TIP) FOR AIRWORTHINESS AND ENVIRONMENTAL CERTIFICATION BETWEEN THE FEDERAL AVIATION ADMINISTRATION OF THE UNITED STATES OF AMERICA AND THE EUROPEAN AVIATION SAFETY AGENCY OF THE EUROPEAN Union (AKA TIP)" |
"A process, part/component, material, or appliance" is the definition of a/an _____. | Article |
What block of the Airworthiness Approval Tag, FAA Form 8130-3, is used for adding supplemental information (i.e. information on life-limiting parts, engines, and propellers or manufacturing data)? | Block 12 |
What subpart of 14 CFR part 21 covers Export of Airworthiness Approvals? | L |
What Advisory Circular provides a list of countries with which the U.S. has BASAs? | AC 21-23 |
A used product that does NOT meet the special requirements of the importing country may be exported if _____. | the Civil Aviation Authority (CAA) of importing country confirms acceptance |
Which part of 14 CFR is the regulatory basis for the issuance of any export certification? | 21 |
What FAA document would you use to find the function code authorizing a designee to issue Export Certificates of Airworthiness for aircraft? | 8100.8 |
Part/Installation Conformity Acronym | T.W.I.S.D. M, CM, MRA, P2, P3 |