Save
Busy. Please wait.
Log in with Clever
or
show password
Forgot Password?
Don't have an account?  Sign up 
Sign up using Clever
or
Username is available taken
show password


Make sure to remember your password. If you forget it there is no way for StudyStack to send you a reset link. You would need to create a new account. Your email address is only used to allow you to reset your password. See our Privacy Policy and Terms of Service.

Already a StudyStack user? Log In

Reset Password
Enter the associated with your account, and we'll email you a link to reset your password.
focusNode
Didn't know it?
click below
 
Knew it?
click below
Don't Know
Remaining cards (0)
Know
0:00
edit
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

  Normal Size     Small Size show me how

Aircraft Finishes

Airframe Aircraft finishes

QuestionAnswer
If registration numbers are to be applied to an aircraft with a letter height of 12 inches, what is the minimum space required for the registration mark? 52 inches
If masking tape is applied to an aircraft such as for trim spraying, and is left on for several days and/or exposed to heat, it is likely that the tape will Cure to the finish and be very difficult to remove.
What is used to slow the drying time of some finishes and to prevent blush? Retarder
Which type of coating typically includes phosphoric acid as one of its components at the time of application? Wash primer.
Which properly applied finish coat finish topcoat is the most durable and chemical resistance polyurethane
Aluminum-pigment in dope is used primarily to Reflect-ultraviolet from the fabric
A correct use for acetone is to Remove grease from fabric
Which of the following is a hazard associated with sanding on fabric covered surfaces during the finishing process? Static electricity buildup
What is likely to occur if unhydrated wash primer is applied to unpainted aluminum and then about 30 to 40 minutes later a finish topcoat, when the humidity is low? Corrosion
Fungicidal dopes are used in aircraft finishing as the First coat to prevent fabric rotting and are applied thin enough to saturate the fabric
Before applying a protective coating to any unpainted clean aluminum, you should Avoid touching the surface with bare hands
What is likely to occur if hydrated wash primer is applied to unpainted aluminum and then about 30 to 40 minutes later a finish topcoat, when the humidity is low? A glossy, blush-free finish
What is the usual cause of runs and sags in aircraft finishes? Too much material applied in one coat
Which defect in aircraft finishes may be caused by adverse humidity, drafts, or sudden changes in temerature? Blushing
Which statement is true regarding paint system compatibility? old wash primer coats may be overcoated directly with epoxy finishes
Created by: C3ntrix
Popular Aviation sets

 

 



Voices

Use these flashcards to help memorize information. Look at the large card and try to recall what is on the other side. Then click the card to flip it. If you knew the answer, click the green Know box. Otherwise, click the red Don't know box.

When you've placed seven or more cards in the Don't know box, click "retry" to try those cards again.

If you've accidentally put the card in the wrong box, just click on the card to take it out of the box.

You can also use your keyboard to move the cards as follows:

If you are logged in to your account, this website will remember which cards you know and don't know so that they are in the same box the next time you log in.

When you need a break, try one of the other activities listed below the flashcards like Matching, Snowman, or Hungry Bug. Although it may feel like you're playing a game, your brain is still making more connections with the information to help you out.

To see how well you know the information, try the Quiz or Test activity.

Pass complete!
"Know" box contains:
Time elapsed:
Retries:
restart all cards