click below
click below
Normal Size Small Size show me how
Safety quiz crap
I HATE THIS }:-(
| Question | Answer |
|---|---|
| When using electrical equipment, you must always stand: | On a dry floor |
| While in the Technology Lab, you should: | Follow all safety rules |
| In the Technology Lab you should stay away from: | Any area you are not working at |
| To dress correctly for the Technology Lab you should | Remove neckties, scarves, and jewelry |
| Report any safety violations or unsafe working conditions to | Your Instructor |
| Before you can use any equipment you must | instructor and read safety tips |
| If you see a fire you should | use the proper fire extinguisher to put out the fire |
| When is it safe to lean on the machines | NEVER |
| At the end of class period you should | Put all tools and materials in there storage areas. |
| When can you operate a piece of equipment with another student at the same time? | To start or stop a machine in a stupid emergency |
| When should you practice correct safety procedures? | ALWAYS 😣😤😡 |
| Is it okay to throw? | NEVER😤 |
| When are you allowed to run in the lab? | Never |
| Which type of fire extinguisher takes out electrical fires? | Class C |
| Which of the following statements about protective equipment is true? | Do not rely only on protective equipment to keep you safe. |
| Use a tool or piece of equipment only when? | You will be using the tool for its specific purpose, and it is the correct tool for the job. |
| What should you do if you do not have the right kind of fire extinguisher for the fire you are trying to put out? | Call for emergency help immediately. |
| Hazardous materials should be stored? | In approved safety containers. |
| In which of the following activities would you be likely to wear chemical goggles? | Spray painting |
| Which type of fire extinguisher would you use on a trash can full of burning trash? | Class A |
| Before you complete a step in your activity? | Plan carefully & think through the step |
| What is the correct way to cut with a craft knife? | Pull it away from your body |
| What should you do with a craft knife when you have finished using it? | Put the protective cap over the blade |
| What color is used to mark the operator's area around a piece of equipment? | Yellow |
| What color is used to signal the location of fire protection equipment? | Red |
| How should you test hot glue to see if it has melted? | Squirt a small amount on a piece of scrap material |
| You should read the label and safety warnings on packages of? | All products |
| If you encounter a flammable metal fire involving material such as magnesium, titanium and sodium, you should use a fire extinguisher with the following on the label? | Class D |
| On equipment and in Design Briefs, the warning DANGER means that if you don't follow directions? | You will probably get hurt and might get killed. |
| In the Design Briefs, IMPORTANT means that if you don't follow directions? | You might damage or destroy equipment |