Busy. Please wait.
or

show password
Forgot Password?

Don't have an account?  Sign up 
or

Username is available taken
show password

why


Make sure to remember your password. If you forget it there is no way for StudyStack to send you a reset link. You would need to create a new account.
We do not share your email address with others. It is only used to allow you to reset your password. For details read our Privacy Policy and Terms of Service.


Already a StudyStack user? Log In

Reset Password
Enter the associated with your account, and we'll email you a link to reset your password.

Remove Ads
Don't know
Know
remaining cards
Save
0:01
To flip the current card, click it or press the Spacebar key.  To move the current card to one of the three colored boxes, click on the box.  You may also press the UP ARROW key to move the card to the "Know" box, the DOWN ARROW key to move the card to the "Don't know" box, or the RIGHT ARROW key to move the card to the Remaining box.  You may also click on the card displayed in any of the three boxes to bring that card back to the center.

Pass complete!

"Know" box contains:
Time elapsed:
Retries:
restart all cards




share
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

  Normal Size     Small Size show me how

lrouthier-JavaScript

Beginning JavaScript Vocabulary

TermDefinition
Array literals You can create arrays in two different ways. The most common of which is to list values in a pair of square brackets. JavaScript arrays can contain any types of values and they can be of mixed types.
Accessing array elements You can get elements out of arrays if you know their index. Array elements' indexes start at 0 and increment by 1, so the first element's index is 0, the second element's index is 1, the third element's is 2, etc.
Multi-dimensional Arrays A two-dimensional array is an array within an array. If you fill this array with another array you get a three-dimensional array and so on.
Array constructor You can also create an array using the Array constructor.
Accessing nested array elements Accessing multi dimensional array elements is quite similar to one-dimension arrays . They are accessed by using [index][index]..... (number of them depends upon the number of arrays deep you want to go inside).
Boolean literals not only Boolean literals (true and false) assert truth or false , but there are some other ways too to derive true or false.
Boolean logical operators expressions
Comparison operators uses x and y
Code Comments Code comments are used for increasing the readability of the code.Comments are like notes , suggestions , warnings ,etc. that you can put for yourself. Code comments are not executed
Single Line Comment Anything on the line following // will be a comment while anything before will still be code.
Multi-Line Comment Anything between /* and */ will be a comment.
console.log Prints text to the console. Useful for debugging.
console.time This function starts a timer which is useful for tracking how long an operation takes to happen.
console.time continued You give each timer a unique name, and may have up to 10,000 timers running on a given page.When you call console.timeEnd() with the same name, the browser will output the time, in milliseconds, that elapsed since the timer was started.
console.timeEnd Stops a timer that was previously started by calling console.time().
Function A function is a JavaScript procedure—a set of statements that performs a task or calculates a value.
Function calling functionName(argument1, argument2, ..., argumentN);
Function hoisting The two ways of declaring functions produce different results. Declaring a function one way "hoists" it to the top of the call, and makes it available before it's actually defined.
if It simply states that if this condition is true , do this , else do something else ( or nothing ) . It occurs in varied forms.
else A fallback to an if statement. This will only get executed if the previous statement did not.
else if This is like an else statement, but with its own condition. It will only run if its condition is true, and the previous statement's condition was false.
For Loops You use for loops, if you know how often you'll loop. The most often used varName in loops is "i".
While Loops You use while loops, if you don't know how often you'll loop.
Do While Loops You use do while loops, if you have to loop at least once, but if you don't know how often.
random Returns a random number between 0 and 1.
floor Returns the largest integer less than or equal to a number.
pow Returns base raised to exponent.
ceil Returns the smallest integer greater than or equal to a number.
PI Returns the ratio of the circumference of a circle to its diameter, approximately 3.14159 or in better terms, the value of PI (π). Note in syntax , we do not put `()` at the end of `Math.PI` because `Math.PI` is not a function.
sqrt Returns the square root of a number.
% (Modulus) it returns the remainder left after dividing the left hand side with the right hand side.
isNaN Returns true if the given number is not a number , else returns false.
Basic Arithmetic Doing basic arithmetic is simple.
Prefix and Postfix increment/decrement operators Prefix increment / decrement operators are operators that first increase the value of the variable by 1 (increment) or decrease the value of an expression / variable by 1 (decrement) and then return this incremented / decremented value.
Object Literals { "property 1": value1, property2: value2, number: value3 }
Property Access name1[string] name2.identifier
Classes A class can be thought of as a template to create many objects with similar qualities. Classes are a fundamental component of object-oriented programming (OOP).
alert Display an alert dialog with the specified message and an OK button. Note: The alert dialog should be used for messages which do not require any response on the part of the user, other than the acknowledgement of the message.
confirm confirm("message") //returns true if confirmed, false otherwise
prompt The prompt() displays a dialog with an optional message prompting the user to input some text. If the user clicks the "Cancel" button , null is returned.
Strings Strings are text. They are denoted by surrounding text with either single or double quotes.
Concatenation string1 + string2
length Returns the length of the string.
toUpperCase, toLowerCase Changes the cases of all the alphabetical letters in the string.
trim() Removes whitespace from both ends of the string.
replace() Returns a string with the first match substring replaced with a new substring.
charAt() Returns the specified character from a string.Characters in a string are indexed from left to right.
charAt() continued The index of the first character is 0, and the index of the last character in a string called stringName is stringName.length - 1. If the index you supply is out of range, JavaScript returns an empty string.
substring() Returns the sequence of characters between two indices within a string.
indexOf() Returns the index within the calling String object of the first occurrence of the specified value, starting the search at fromIndex, Returns -1 if the value is not found. The indexOf method is case sensitive.
switch Acts like a big if / else if / else chain. Checks a value against a list of cases, and executes the first case that is true.
switch continued It goes on executing all other cases it finds after the first true case till it finds a breaking statement,after which it breaks out of the switch If it does not find any matching case , it executes the default case.
Ternary Operator The ternary operator is usually used as a shortcut for the if statement.
Variable Assignment var name = value;
Variable changing varname = newValue
Created by: 2016routhierl