CCNA Chapter 1 Word Scramble
|
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
Question | Answer |
Which layer determines the availability of communicating partners along with the resources necessary to make the connection, coordinates partnering applications, and forms a consensus on procedures for controlling data integrity and error recovery? | Application Layer |
Which layer is responsible for converting data packets from the Data Link layr into electrical signals? | Physical Layer |
At which layer is routing implemented, enabling connections and path selection between two end systems? | Network Layer |
Which layer defines how data is formatted, presented, encoded, and converted for use on the network? | Presentation Layer |
Which layer is responsible for creating, managing, and terminating sessions between applications? | Session Layer |
Which layer ensures the trustworthy transmission of data across a physical link and is primarily concerned with physical addressing, line discipline, network topology, error notification, ordered delivery of frames, and flow control? | Data Link Layer |
Which layer is used for reliable communication between end nodes over the network and provides mechanisms for establishing, maintaining, and terminating virtual circuits; transport-fault detection and recovery; and controlling the flow of information? | Transport Layer |
Which layer provides logical addressing that routers will use for path determination? | Network Layer |
Which layer specifies voltage, wire speed, and pinout cables and moves bits between devices? | Physical Layer |
Which layer combines bits into bytes and bytes into frames, use MAC addressing, and provides error detection? | Data Link Layer |
Which layer is responsible for keeping the data from different applications separate on the network? | Session Layer |
Which layer is represented by frames? | Data Link Layer |
Which layer is represented by segments? | Transport Layer |
Which layer is represented by packets? | Network Layer |
Which layer is represented by bits? | Physical Layer |
Put the following in order of encapsulation: Packets Frames Bits Segments | Segments Packets Frames Bits |
Which layer segments and reassembles data into a data stream? | Transport Layer |
Which layer provides the physical transmission of the data and handles error notification, network topology, and flow control? | Data Link Layer |
Which layer manages device addressing, tracks the location of devices on the network, and determines the best way to move data? | Network Layer |
What is the bit length and expression form of a MAC address? | 48 bits (6 bytes( expressed as a hexadecimal number |
This device sends and receives information about the Network Layer | Router |
This layer crates a virtual circuit before transmitting between two end stations. | Transport Layer |
This device uses hardware addresses to filter a network. | Bridge or switch |
Ethernet is defined at these layers. | Data Link and Physical |
This layer supports flow control, sequencing, and acknowledgement. | Transport Layer |
This device can measure the distance to a remote network. | Router |
Logical addressing is used at this layer. | Network Layer |
Hardware addresses are defined at this layer. | Data Link Layer |
This device creates one big collision domain and one large broadcast domain. | Hub |
This device creates many smaller collision domains, but the network is still one large broadcast domain. | Switch or bridge |
This device can never run full duplex. | Hub |
This device breaks up collision domains and broadcast domains. | Routers |
Created by:
t3ph13
Popular Computers sets