Block 8 Quiz 1 Word Scramble
|
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
| Question | Answer |
| Skydrol® is dyed ______________ in color? | Purple |
| Depressurization of the hydraulic system is NOT necessary when servicing closed hydraulic components. | False |
| In the absence of a specific replacement instructions, a recommended service life of return filters are: | 1,500 hours |
| Pascal's Law states that pressure applied to any part of a confined liquid is transmitted with undiminished intensity to every other part. | True |
| What is viscosity in reference to aircraft hydraulic systems. | A measure of a hydraulic fluid's internal resistance to flow. |
| 6. The three principal categories of hydraulic fluids are: (This question has multiple answers) | Phosphate esters, Polyalphaolefins, Minerals |
| 7. What mineral-based hydraulic fluid can be used as a rust-inhibitor alternative to MIL-H-5606? | MIL-H-6083 |
| 8. Aircraft hydraulic systems designed around Skydrol® fluids should be virtually trouble-free if properly serviced. | True |
| 9. What are the two general types of contamination found within hydraulic systems? | abrasives and non abrasives |
| 10. During a routine contamination check, hydraulic fluid that appears to be visibly clean is good/usable fluid. | False |
| 11. Skydrol® is a registered trade name of which company? | Monsanto Chemical Co. |
| 12. Which of the following seals is not compatible with Skydrol®? | neoprene and Buna-N |
| 13. Hydraulic operations are roughly ___________ percent efficient, with _______________ loss due to friction. | 100, negligible |
| 14. MIL-H-5606 is dyed ______________ in color? | Red |
| 15. In addition to viscosity, what are three important characteristics of hydraulic fluids that manufactures take into account? | fire point, flash point, and chemical stability |
| 16. One of the main advantages of Skydrol® is its ___________________ | wide operating temperatures. |
| 17. When performing a "clean cycling" of a hydraulic system suspected of contamination, a hydraulic ground power unit (HGPU) should be used to clean the system. | False |
| 18. When taking hydraulic samples for testing, always drain ______________ of fluid before taking the tested sample. | 1 pint |
| 19. System operating pressure may vary from a couple hundred PSI in small aircraft and rotorcraft to _____ in large transports. | 5,000 psi |
| 20. Which hydraulic fluid is polyalphaolefin based? | MIL-H-83282 |
Created by:
sampizzuto
Popular Aviation sets