Composites Ch 1,2,3 Word Scramble
|
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
| Question | Answer |
| What is a composite structure? | A material formed by 2 or more materials that are combined |
| What are some early example of composite structures not described in your test? (Three) | Plywood, carbon fiber, plastic |
| How has advanced composites evolved? What is FRP? | High strength and light weight Fiber reinforced plastic |
| Why is it important to repair versus scrap composite parts? | Reduce cost |
| What three aspects concerning fabric patches are extremely important for distributing the stresses imposed on a repair? | Fiber type, weave and positioning |
| What are the advantages of using composites? | Very high strength to weight ratio, wear resistant, can be formed into dynamic shapes |
| The strength of the composites depends on three factors; they are? | Type of fibers being used, bonding material and how the part is engineered |
| What are th777 vertical fin and engine cowls made of? | Vertical fin is fiberglass and carbon Engine cowls is carbon fiber and epoxy skin covering a core of Nomex honey comb |
| Where are composites used on the Boeing 757? | Secondary structural components |
| What are Nomex panels and where are they used on the 767 aircraft? | Used for flooring and corrosion resistance Located under seats and in alleys |
| How are the propellers of the Saab SF340 constructed? | Fiberglass skin with the laminated carbon fiber spars |
| How much of the Sikorsky S-76 is composite, and what type of material is the primary weight saver? | 60% of the airframe Kevlar and honeycomb |
| What are 3 common types of reinforcing fibers and the two uncommon fibers | Common- fiberglass, carbon, graphite //// Uncommon - ceramic, boron |
| Fiberglass is made from | Small strands of molten silica glass |
| Common types of fiberglass being used in the AC industry | E-glass, S-glass, C-glass, and Trevor schoonover |
| What is matrix | Bonding substance used to fuse, strengthen, shape, and set composite material |
| Describe aramid | Aromatic poly fibers, very light weight & stretchy but strong fibers |
| What is the aramid used on A/C? What is its practical application? | Parts subject to Ralphs meat. Parts that are subject to high stress and vibration like rotor blades. |
| What are disadvantages of aramid? | Hard to work with (cut & drill). Frays easily, and resin deteriorates it. |
| Difference between carbon fiber and graphite fiber as called out in an A/C SRM | Carbon fiber is the same as graphic fiber |
| What are the characteristics of carbon that are useful for aircraft? | Very strong & stiff, rigid, electrically conductive, low thermal, expansion & wear resistant. |
| How does carbon compare to kevlar? | Carbon is stronger in compressive strength than kevlar |
| Disadvantage of carbon fiber | Corrosive when bonded to aluminum, it is also expensive. Can't be repaired |
| How is Boron fiber made? Describe its characteristics | Depositing boron into a thin filament of tungsten |
| Where are ceramic fibers best utilized? | High temp applications |
| How does resin affect the tensile strength of fabric | It decreases it |
| What is fiber science | Specific placement of fibers to produce the highest strength |
| The strength of fibers are ________ to the direction the threads run. | Parallel |
| What is warp, how is is designated, and how is it identified. | Directions of fibers as it rolls off of the roll. Up and down. |
| What is the fill. | Direction that runs 90 degrees to warp, from one edge to another. |
| What is the selvage edge and how is it used inn repairs? | Manufactured edge to stop from unraveling. |
| Why is bias important in composites? | Can be stretched along bias, for farming. |
| With regard to aramid, what does 1575de mean? | Weighs 1575 grams |
| With regard to carbon fiber, what does 4.5k tow mean? | 4,500 filaments used to make one tow. |
| What is unidirectional fiber? | All fibers run in 2 or more directions. |
| What is bidirectional or multidirectional fabric? | Fibers run in 2 or more directions. |
| What is mat fabric? | Chopped fibers that are pressed together. |
| What is the difference between plain and satin weaves? | Plain is a chessboard design, Satin is 3 over 1. |
| Fabric styles are characterized by the ___________. | Yarn construction count. |
| How is fabric's weight measured? | g/sq meter |
| What are hybrids and why are they used? | Mixes different types of fiber combinations or materials, used to reduce cost, or obtain a certain strength characteristic. |
| What are the different types of hybrids? | Interplay, interplay, selective placement |
| What is a matrix? | Bonding substance used to fuse, strengthen, shape, and set composite material |
| How is epoxy resin different from polyester resin? | Epoxy resin is much stronger and less brittle, chemical resistant |
| What is the limitation with using thermoplastics for structural components? | 750 degrees F |
| How are thermoplastics and thermosetting plastics different? | Thermoplastics can be heated and reshaped |
| Why are epoxy resins amongst the most common matrix systems used in composite fabrication and repair? | Flexible application, good adhesive characteristics, very resistant against deterioration, easy to cure at room temp and highly economical |
| How are epoxy resin systems obtainable from a hardware store different from aircraft grade systems? | Aircraft grade is stronger, more flexible, more reliable |
| What is the most important rule a technician can follow with epoxy resins? | Use SRM |
| What is the trade-off by using flexibilizers in an epoxy resin system? | Reduced tensile strength for more flexibility |
| How can "cross linking" be described? | 2 dimensional molecule to form 3 dimensional grid 3d linking between molecules |
| Where are polybutadiene resins commonly found? | Coatings, adhesives, and polting compounds |
| How do the temperature cure ranges affect the cross linking of polybutdiene resin systems? | Higher heat, the cross links more |
| Define pot life | Time between resin mix and when its no longer useful |
| Define shelf life | Time product is good in an unopened container |
| What is the problem of adding too much matrix to a composite component? | Brittle, weak, heavy |
| What is the problem of starving a component of matrix to a composite component? | Weak and lean |
| What is the proper ratio of resin to fiber in advanced composite components? | 60:40 |
| How are pre-preg materials made? | Resin is already impregnated into the fabric. |
| What is the significance of the diamond shape on the plastic backing of pre-preg material? | Indicates warp direction. |
| What are the advantages of pre-pregs. | Better impregnation, ratio, less room for human factor. |
| What are the disadvantages of pre-pregs? | Kept cold and has expiration date |
| Define adhesives. | Substance that bonds surface together. |
| Why are adhesive films used in a pre-preg repair? | Bond pre-preg patch repair. |
| What are foaming adhesives and their application? | Prevent dry areas. |
| Name some different types of fillers | Microballoons, chopped fibers, flax. |
| Difference between chopped fiber and Flax. | Fiber: cut from any fiber, Flax: fuzzy fibers woven from trouds. |
| Describe "metal matrix" and give an example. | formed when chopped fibers are mixed with molten metal. |
Created by:
JoeyRiggs11
Popular Aviation sets