Net + 10-006 CMD Word Scramble
|
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
Question | Answer |
command to show the routing table on a Windows, MAC, or Linux machine. | netstat -r |
Windows alternative to the netstat -r command | route print |
This command is used in Windows to display the IP address information of the system. | ipconfig |
Windows command: Displays all TCP/IP settings and MAC address. | ipconfig /all |
This Windows command displays the DNS resolver cahce. | ipconfig /displaydns |
This Windows command flushes the DNS resolver cache. | ipconfig /flushdns |
This command displays or sets settings on a network card on a Mac/Linux/UNIX system | ifconfig |
Mac/Linux/UNIX command that displays the network card and IP settings. | ifconfig |
Mac/Linux/UNIX command to enable the first Ethernet card. | ifconfig eth0 up |
Mac/Linux/UNIX command that would disable the first Ethernet card. | ifconfig eth0 down |
This (All OSes) command checks the network connectivity between two nodes. | ping |
Switch that tells ping to run indefinitely (on Windows) | ping -t |
Switch that tells ping to use an IPv6 address (Windows) | ping -6 |
UNIX/Linux command to ping an IPv6 address | ping6 |
This command traces the route between two hosts. There are two versions, one for Windows and another for Linux/UNIX/Mac. | tracert (Windows) traceroute (Mac/UNIX/Linux) |
Specify tracert with an IPv6 address in WIndows | tracert -6 |
Specify an IPv6 address with traceroute in Mac/Linux/UNIX | traceroute6 |
Microsoft utility that combines the functions of ping and tracert and adds some additional functions. | pathping |
This all OS command allows administrators to examine network statistics about a system. These stats include info such as listening ports and established connections. | netstat |
Netatat switch: Displays all connections and listening ports. | netstat -a |
Netstat switch: Displays the executable involved in creating each connection and listening port. | netstat -b |
Netstat switch: DIsplays Ethernet statistics | netstat -e |
Netstat switch: Displays FQDN of foreign addresses | netstat -f |
Netstat switch: Displays addresses and ports in numerical form | netstat -n |
Netstat switch: Displays the owning process ID associated with each connection. | netstat -o |
Netstat switch: Displays statistics about the protocol specified after this switch. Options include TCP, UDP, TCP6, UDP6. | netstat -p protocol |
Netstat switch: Displays per protocol statistics, by default IP, IP6, ICMP, ICMP6, TCP, TCPv6, UDP, UDPv6. | netstat -s |
Netstat switch that displays the routing table | netstat -r |
Netstat switch: Displays the current connection offload state | netstat -t |
Netstat switch: Redisplays the selected statistics at intervals set bu this switch. | netstat interval |
This command allows a tech to check information about NetBIOS names. | nbtstat |
Nbtstat switches: Displays the NetBIOS name table for a remote machine, given it's name. | nbtstat -a computername |
Nbtstat switches: Displays the NetBIOS name table for a remote machine, given its IP address | nbtstat -A 192.168.1.6 |
Nbtstat switches: Lists NBT's cache of remote machine names and their IPs | nbtstat -c |
Nbtstat switches: Display NetBIOS names registered by the local machine. | nbtstat -n |
Nbtstat switches: Purge and reload the remote cache name table | nbtstat -R |
Command to show the full set of nslookup options | from the nslookup prompt, ? OR help |
Command line utility for diagnosing DNS problems. Works on all OSes. | nslookup |
All OSes command to diagnose problems associated with the Address Resolution Protocol. | arp |
arp switch: Displays current ARP entries | arp -a |
arp switch: Adds a static entry. | arp -s 157.55.85.212 00-aa-00-62-c6-09 |
arp switch: Deletes an entry. Can also delete all entries. | arp -d inet_addr or arp -d * |
Ping switches: Ping until stopped (Windows) | ping -t |
Ping switches: Resolve an address to a hostname | ping -a |
Ping switches: Sent a set number of echo requests | ping -n |
Ping switches: Ping with the DF flag bit set. | ping -f |
Command line tool for querying DNS servers. Useful for troubleshooting on Linux/UNIX/Mac systems | dig |
Created by:
douros05
Popular Computers sets