SRC - NRS1 Commands Word Scramble
|
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
Question | Answer |
Display primary-image location: | show bof |
Display primary-config location: | show bof |
Display ethernet console information: | show bof |
Display persist mode (on/off): | show bof |
Go back to the login menu: | logout |
Change the system name: | configure system name <name> |
Save router configuration: | admin save [cf3:/<name>.cfg] |
Set a config to be the startup config: | bof primary-config cf3:/<name>.cfg ; save |
Reboot the router: | admin reboot now |
Display IOM cards installed: | show card |
Configure a card: | configure card <slot> card-type <type> ; no shutdown |
Display MDA installed on cards: | show mda |
Configure an mda | configure card <slot> mda <slot> mda-type <type> ; no shutdown |
Display port information: | show port [#] [detail] |
Display OS version and current config: | admin display-config |
Display information about the current context level: | info [detail] |
Display logging information: | show low log-id <#> |
Display interface information: | show router interface |
Configure system interface: | config router interface system address <ip>/<mask> |
Configure ethernet interface: | config router interface <name> address <ip>/<mask> ; port <#> |
Display the routing table: | show router route-table |
Turn on debug for icmp packets: | debug router ip icmp |
Configure static route: | configure router static-route <ip>/<mask> next-hop <ip> |
Show status of ospf protocol: | show router ospf status |
Show general protocol information on router: | show router status |
Created by:
Datheral
Popular Computers sets