ENGINE INDUCTION SYSTEMS
Quiz yourself by thinking what should be in
each of the black spaces below before clicking
on it to display the answer.
Help!
|
|
||||
|---|---|---|---|---|---|
| show | From a muff that is installed around some part of the exhaust system.
🗑
|
||||
| show | From inside the engine cowling.
🗑
|
||||
| Where does carburetor ice normally form in a carburetor? | show 🗑
|
||||
| show | Heated air causes the fuel-air mixture to become richer.
🗑
|
||||
| What is used to drive most of the external superchargers used on modern reciprocating engines? | show 🗑
|
||||
| show | The amount of exhaust gas that is forced to flow through the turbine. This is controlled by the position of the waste gate.
🗑
|
||||
| What is meant by a convergent inlet duct for a turbine engine? | show 🗑
|
||||
| show | A divergent duct is one whose cross-sectional area becomes greater in the direction the air flows.
🗑
|
||||
| show | A bell-mouthed inlet duct.
🗑
|
||||
| What is the danger of operating an aircraft reciprocating engine with too high a carburetor air temperature? | show 🗑
|
||||
| Why do some turbine engines use variable inlet guide vanes? | show 🗑
|
||||
| How do some turbine engines prevent ice formation on the inlet guide vanes? | show 🗑
|
||||
| What is usually installed in a large reciprocating engine between the turbosupercharger and the carburetor? | show 🗑
|
||||
| show | In the Cold position.
🗑
|
||||
| show | A high-velocity stream of compressor bleed air is blown out in front of the engine to break up the vortices that form in front of the engine when it is operating at high power on the ground.
🗑
|
Review the information in the table. When you are ready to quiz yourself you can hide individual columns or the entire table. Then you can click on the empty cells to reveal the answer. Try to recall what will be displayed before clicking the empty cell.
To hide a column, click on the column name.
To hide the entire table, click on the "Hide All" button.
You may also shuffle the rows of the table by clicking on the "Shuffle" button.
Or sort by any of the columns using the down arrow next to any column heading.
If you know all the data on any row, you can temporarily remove it by tapping the trash can to the right of the row.
To hide a column, click on the column name.
To hide the entire table, click on the "Hide All" button.
You may also shuffle the rows of the table by clicking on the "Shuffle" button.
Or sort by any of the columns using the down arrow next to any column heading.
If you know all the data on any row, you can temporarily remove it by tapping the trash can to the right of the row.
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
Created by:
Aima2019
Popular Aviation sets