Engine lubrication 7
Help!
|
|
||||
|---|---|---|---|---|---|
| A reciprocating engine is found to have excessive oil consumption without evidence of any oil leaks. What is the likely cause? | The piston rings are worn or broken.
🗑
|
||||
| What are the functions of lubricating oil in reciprocating engines? | To reduce friction between moving parts and remove heat.
🗑
|
||||
| Name two important characteristics of aircraft engine oil. | The oil must be light enough to circulate freely yet heavy enough to provide the proper oil film at engine operating temperatures.
🗑
|
||||
| What could happen to an oil that is too low in viscosity at normal engine operating temperatures? | It may become so thin that the oil film between moving parts is easily broken, resulting in premature wear.
🗑
|
||||
| What are some of the factors that must be considered by an engine manufacturer in determining the proper grade of oil for a particular engine? (3) | The operating load and temperature as well as the rotational speed.
🗑
|
||||
| Why do aircraft reciprocating engines use a relatively high viscosity oil? | Because they usually have large operating clearances, and operate at high temperatures and pressures.
🗑
|
||||
| Name some oil contaminates. (5) | Metal particles, dirt, carbon, moisture and acids.
🗑
|
||||
| What is a possible indication of low oil pressure together with high oil temperature? | A low or inadequate oil supply.
🗑
|
||||
| In ashless dispersant oils, what function does the dispersant perform? | The dispersant causes sludge forming materials to repel each other and remain in suspension until they can be trapped by the oil filter or drained. This keeps the oil passages and ring grooves free of harmful deposits, and the inside of the engine clean.
🗑
|
||||
| Why do oil reservoirs have expansion space? | To provide for oil foaming, thermal expansion, and air in the return oil.
🗑
|
||||
| What could cause oil foaming? (3) | Diluted oil, contaminated oil, and the oil level being too high.
🗑
|
||||
| What controls oil pressure in a gear type oil pressure pump? | An oil pressure relief valve.
🗑
|
||||
| What function does an oil cooler bypass valve perform? | It directs the oil either through the cooler or around it in order to maintain proper operating oil temperatures.
🗑
|
||||
| What could be a possible indication if the oil cooler passage becomes obstructed? | A high oil temperature.
🗑
|
||||
| Where is the oil temperature bulb usually located? | At the engine oil inlet.
🗑
|
||||
| What does the presence of metal particles in an engine oil filter indicate? | Depending on the type and size of the metal particles, this usually indicates abnormal wear and possible engine internal failure.
🗑
|
||||
| What should be done if metal particles are found in an engine oil filter? | Follow engine manufacturer's maintenance instruction.
🗑
|
||||
| Where is the most critical point of lubrication in a gas turbine engine? | At the turbine bearing.
🗑
|
||||
| What type of oil is used in a turbine engine oil system? | Synthetic oil.
🗑
|
||||
| Where are oil screens or filters most likely located in a turbine engine oil system? (3) | At the oil pressure system (main filter) , scavenge system, and at or just before the oil jet (last chance).
🗑
|
||||
| Name two types of turbine engine oil coolers. | Air cooled and fuel cooled.
🗑
|
Review the information in the table. When you are ready to quiz yourself you can hide individual columns or the entire table. Then you can click on the empty cells to reveal the answer. Try to recall what will be displayed before clicking the empty cell.
To hide a column, click on the column name.
To hide the entire table, click on the "Hide All" button.
You may also shuffle the rows of the table by clicking on the "Shuffle" button.
Or sort by any of the columns using the down arrow next to any column heading.
If you know all the data on any row, you can temporarily remove it by tapping the trash can to the right of the row.
To hide a column, click on the column name.
To hide the entire table, click on the "Hide All" button.
You may also shuffle the rows of the table by clicking on the "Shuffle" button.
Or sort by any of the columns using the down arrow next to any column heading.
If you know all the data on any row, you can temporarily remove it by tapping the trash can to the right of the row.
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
Created by:
Justin84
Popular Aviation sets