Save
Busy. Please wait.
Log in with Clever
or
show password
Forgot Password?
Don't have an account?  Sign up 
Sign up using Clever
or
Username is available taken
show password


Make sure to remember your password. If you forget it there is no way for StudyStack to send you a reset link. You would need to create a new account. Your email address is only used to allow you to reset your password. See our Privacy Policy and Terms of Service.

Already a StudyStack user? Log In

Reset Password
Enter the associated with your account, and we'll email you a link to reset your password.
focusNode
Didn't know it?
click below
 
Knew it?
click below
Don't Know
Remaining cards (0)
Know
0:00
edit
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

  Normal Size     Small Size show me how

Shop Safety Test

TermDefinition
Coping saw cutting sharp curves
fillips head screw driver insert and remove screws
claw hammer hammering, prying, inserting or removing nails
nail set recess the head of a nail below the surface
back saw making very accurate cuts across the grain
cordless power drill drilling holes, and tightening and loosening screws
bench plane smooth, straighten or flatten the face of a board
spade bit/speedbore bit/paddle bit dilling large holes through a piece of material
try square measures 90 degree angles, short distances, and is a straight edge
chalk line marking straight lines across long distances
sliding T bevel duplicating angles, other than 90 degrees
forstner bit large diameter whole with a flate bottom
twist bit small diameter general purpose drilling
file freehand shaping and smoothing a piece of wood or other material
combination square 90 degree angles, 45 degree angles, straight edge, short distance measurments, a level, and a scribe
chisel rough free hand carving
framing square measures slightly longer distances, straight edge, 90 degrees
bock plane smoothing, straightening, flattening edge grain
marking gauge to mark a straight line parallel to an edge
dead blow mallet striking non metalic surfaces with lots of force
rip saw long cuts in the same direction as the grain/with the grain
cross cut saw making straight cuts against or opposite direction of the grain
adjustable wrench tightening and loosening nuts and bolts
speed square 90,45, straight edge, short distance measurments, protractor
scratch awl used to mark a piece of wood, marking a center of a hole to be drilled
surform rough free hand shaving
measuring tape/tape measure measures long distances
rasp rough free hand shaping
Created by: BRossMan2024
Popular Family and Consumer sets

 

 



Voices

Use these flashcards to help memorize information. Look at the large card and try to recall what is on the other side. Then click the card to flip it. If you knew the answer, click the green Know box. Otherwise, click the red Don't know box.

When you've placed seven or more cards in the Don't know box, click "retry" to try those cards again.

If you've accidentally put the card in the wrong box, just click on the card to take it out of the box.

You can also use your keyboard to move the cards as follows:

If you are logged in to your account, this website will remember which cards you know and don't know so that they are in the same box the next time you log in.

When you need a break, try one of the other activities listed below the flashcards like Matching, Snowman, or Hungry Bug. Although it may feel like you're playing a game, your brain is still making more connections with the information to help you out.

To see how well you know the information, try the Quiz or Test activity.

Pass complete!
"Know" box contains:
Time elapsed:
Retries:
restart all cards