DM terms 2 Word Scramble
|
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
Question | Answer |
Relative inability of a material to deform plastically | Brittleness |
Relative ability of a material to deform plastically under a tensile stress before it fractures | Ductility |
Deformation that is recovered upon removal of an externally applied force or pressure | Elastic strain |
Relative stiffness of a material; ratio of elastic stress to elastic strain | Elastic modulus (Modulus of elasticity or Young's modulus) |
The critical stress intensity factor at the beginning of rapid crack propagation in a solid containing a crack of known shape and size | Fracture toughness |
Resistance of a material to plastic deformation | Hardness |
Maximum amount of plastic strain a tensile test specimen can sustain before it fractures (See Ductility) | Percent elongation |
Deformation that is not recoverable when the externally applied force is removed | Plastic strain |
Force per unit area acting on the external surface of a material | Pressure |
Maximum stress at which stress is proportional to strain and above which plastic deformation occurs | Proportional limit |
The relative amount of elastic energy per unit volume released on unloading of a test specimen | Resilience |
Force per unit area within a structure subjected to an external force or pressure (See Pressure) | Stress |
Area or point of significantly higher stress associated with a structural discontinuity such as a crack or pore or a marked change in dimension of a structure | Stress concentration |
Change in length per unit initial length | Strain |
Increase in strength and hardness and corresponding decrease in ductility of a metal that is caused by plastic deformation | Strain hardening (Work hardening) |
Change in strain per unit time during loading of a structure | Strain rate |
Maximum stress that a structure can withstand without sustaining a specific amount of plastic strain (___A___) or stress at the point of fracture (___B___) | Strength; A=yield strength; B=ultimate strength |
Ability of a material to absorb elastic energy and to deform plastically before fracturing; measured as the total area under a plot of tensile stress vs. tensile strain | Toughness |
The stress at which a test specimen exhibits a specific amount of plastic strain | Yield strength |
Created by:
sean.sebourn
Popular Dentistry sets