click below
click below
Normal Size Small Size show me how
Technical drawing
Drafting terms to know
| Term | Definition |
|---|---|
| Technical drawing | the universal visual language used to design and build objects, machinery, and structures. |
| Sketch | quick, un-detailed hand drawing used to capture an initial idea. |
| Orthographic Projection | 2D drawing showing an object from multiple flat angles—typically the front, top, and side views. |
| Isometric Drawing | 3D pictorial view of an object drawn on a grid with 30-degree angles so you can see the top, front, and side at the same time. |
| Floor Plan / Blueprint | A map or layout of a room or building viewed straight down from above. |
| Cross-Section | A view showing what the inside of an object looks like if you sliced straight through it. |
| Construction Line | A very light, thin line used to block out shapes before you draw the final lines. |
| Visible (Object) Line | A thick, dark, solid line that outlines the visible edges of the main object. |
| Hidden Line | A series of short dashes showing edges or holes that are blocked from view inside the object. |
| Centerline | A long-and-short alternating dashed line that marks the exact center of circles, cylinders, or symmetrical parts |
| Dimension & Extension Lines | Thin lines with arrows and numbers that show the exact length, width, or height of a part. |
| Leader Line | A thin line with an arrow pointing from a note or measurement directly to a specific feature on the drawing. |
| Dimension | The numerical measurement (such as inches or millimeters) written on a drawing to show true size. |
| Scale | The proportion used to draw a large object (like a house or car) smaller or larger so it fits neatly on a piece of paper |
| Radius | Radius is the distance from the center of a circle to its edge |
| diameter | is the full distance across a circle passing through the center. |