click below
click below
Normal Size Small Size show me how
ELEC MACH 2
| Question | Answer |
|---|---|
| What is a stator | The stationary part in a magnetic field system |
| What is a rotor | The rotating part that is a system of conductors |
| What is the yoke in a machine | The outer hollow cylinder frame that provides structural and mechanical support for the poles which completes the magnetic circuit by carrying magnetic flux produced by the poles |
| What is the yoke typically made out of | Small machines: Cast iron Large Machines: Cast steel or Rolled Steel |
| What does the magnetic field system do | It is on a stator that uses field poles to create main magnetic flux across air gaps, and interacts with the armature/conductor currents to produce torque or induced voltage |
| What is the field coil | It is mounted on the poles and carry dc exciting current, it is made of enameled copper wire connected so that adjacent poles have opposite polarity. |
| What is the function of the field system in a machine | to produce a uniform magnetic field within which armature rotates |
| What is a pole in a machine | A pole is a magnetic north or south region created on stator or rotor, provides housing for the filed winding and produces magnetic flux inside the machine, they always come in pairs. |
| What purpose does pole shoes serve | spread out flux in air gap, reduce reluctance of magnetic path due to having larger cross-section, provide support exciting coils and prevents field coils from falling |
| What is the pole core made of | cast steel or laminated steel |
| what is the pole shoe made of | laminated steel |
| What are interpoles | Small electromagnets located between the main field poles to improve commutation (recue sparking) and to counteract the affects of armature reaction |
| What is the armature | It is the rotating component where electromagnetic interaction takes place, it is mounted on the shaft and consists of laminated steel cores containing slots that house insulated conductors |
| What is created in the armature for generators | Generated EMF appears at armature |
| What does the armature do in motors | carries current and develops back EMF opposing the supply |
| What is the armature core made of | High permeability, low reluctance material such as slotted soft iron or silicon steel laminates stacked to form a cylindrical core |
| What does the armature winding do | Induces voltage ad magnetic flux within the armature, it is propelled by the prime mover, linked to an external circuit, made of conducting materials like copper and located in the armatures "teeth" slots |
| Lap winding | many short, local loops connected in parallel where the number of parallel paths = the number of poles, low voltage high current applications, more brushes |
| Wave winding | two parallel paths consisting of multiple windings where the number of parallel paths is 2 despite the number of poles, is used for high voltage low current applications and contains fewer brushes |
| What is the shaft in a machine | It is a strong cylindrical component attached directly to the armature that produces torque, which causes rotation, provides mechanical support to armature and commuter, transfers mechanical energy |
| What is the shaft in a machine made of | High strength steel made to withstand twisting forces and continuous operation |
| What is commutation | When the commutator and brushes work together in a DC generator to change AC into DC, The flipping of current direction |
| What does a split ring commutator due | helps to reverse the direction of current in armature coil, made of copper segments that split from the center and mounted on armatures shaft. |
| What is the split rings function | Collects current from armature conductors, acts as a mechanical rectifier that converts alternating voltage generated in an armature winding into a direct voltage across brushes |
| What is the commutation principle | As the split ring rotates, a small carbon brush gently touches the segments of the machine, when the brush moves from one segment to another, the coil connected to two segments gets short circuited for ting moment and the current inside flips directions |
| Why is the commutation principle used | So that as the commutator and brushes flip, it acts as a rotary switch and the positive voltage is always connected to the same terminal creating a positive wave. |
| What is the carbon brush | Small carbon component that maintains electrical contact between the external circuit and rotating commutator |
| What is the carbon brush functions and desirable properties | Its function is to collect armature current from commutator and supply it to the load, or feed current into commutator segments. The goal is for it to be a good electrical conductivity, and less co-efficient of friction |
| What does more coils in a generator do | reduces the pulsations or ripples in output emf |
| What is armature reaction | distortion of the field flux distribution due to the load current in armature, the effect of the magnetic flux produced by the armature current on the distribution of flux under the main poles of a DC generator |
| What two effects does armature reaction have | Demagnetization effect -> demagnetizes or weakens main field flux Cross magnetization effect -> cross magnetizes or distorts main flux |
| what is the magnetic neutral axis | The axis which is perpendicular to the field flux |
| What is the geometrical neutral axis | the axis that bisects the angle between the center line of adjacent poles. Clearly it is the axis symmetry between two poles. |
| What are the effects of armature reaction | neutral plane shifting, sparking at the brushes, increased wear on commutator, reduced or increased terminal voltage, uneven torque or speed fluctuations, nigher iron losses |
| What are compensating windings | series coils embedded in pole face slots, connected in series with armature and carry current in opposite direction to that of adjacent armature conductors below pole shoes |
| What does compensating windings do | wound to oppose armature's field -> cancels armature reaction, also keeps neutral place fixed at its original position for all load |
| What do interpoles do | Creates a field that opposes armature reaction by shifting neutral place opposite of armature reaction, creates stable commutation without moving brushes. |
| What is motor reaction in a generator | When a generator delivers current to a load, armature current creates a magnetic force that opposes rotation of armature. The force applied to turn the armature must overcome the motor reaction force in all DC generators |
| What is the prime mover | The device that provides the turning force applied to the armature |