click below
click below
Normal Size Small Size show me how
Tech ed Safety ampo
Question | Answer |
---|---|
1.When using electrical equipment,you must always stand | On a dry floor |
2. While in the Technology lab, you should | Follow all safety rules |
3. In the Technology Lab, you should stay away from | Any area you are not working in |
4. To dress correctly for the Technology lab, you should | Remove neckties, scarves, and jewelry |
5. Report any safety violations or unsafe working conditions to | Your instructor |
6. Before you can use any equipment, you must | Ask your instructor for permission be trained on how to use it read all safety instructions |
7. If you see a fire you should | Use the proper fire extinguisher to put the fire out |
8. When is it safe to lean on machines? | Never |
9. At the end of the class period, you should | Put tools and materials in their proper storage areas |
10. When can you operate a piece of equipment with another student at the same time | To start and stop a machine in an emergency |
11. When should you practice correct safety procedures? | Always |
12. It is okay to throw hand tools power tools or sharp objects | No |
13. When are you allowed to run in the Technology Lab? | Never |
14. Which type of fire extinguisher would use on a electrical fire | Class C |
15. Which of the following statements about protective equipment is true? | Do not rely only on protective equipment to keep you safe |
16.Use a tool or piece of equipment only when | You will be using the tool for its specific purpose, and it is the correct tool for the job |
17. What should you do if you do not have the right kind of fire extinguisher for the fire you are trying to put out? | Call for emergency help immediately |
18. Hazardous materials should be stored | In approved safety containers |
19. In which of the following activities would you be likely to wear chemical goggles? | Spray painting |
20. Which type of fire extinguisher would you use on a trash can full of burning trash. | Class A |
21. Before you complete a step in your activity | Plan carefully and think through the steps |
22. What is the correct way to cut with a craft knife | Pull it away from your body |
23. What should you do with a craft knife when you have finished using it | Put the protective cap over the blade |
24. What color is used to mark the operators area around a piece of equipment | Yellow |
25. What color is used to signal the location of fire protection equipment | Red |
26. How should you test glue to see if it has melted | Squirt a small amount on a piece of scrap metal |
27. You should read a label and safety warnings on packages | All products |
28. If you encounter a flammable metal fire involving material such as magnesium titanium and sodium you should use what fire extinguisher | Class D |
29. On equipment and in Design briefs the warning DANGER means that if you don't follow directions | You will probably get hurt or might be killed |
30. In the Design Briefs, Important means that if you don't follow direction | You might damage or destroy equipment |