Busy. Please wait.
or

show password
Forgot Password?

Don't have an account?  Sign up 
or

Username is available taken
show password

why


Make sure to remember your password. If you forget it there is no way for StudyStack to send you a reset link. You would need to create a new account.
We do not share your email address with others. It is only used to allow you to reset your password. For details read our Privacy Policy and Terms of Service.


Already a StudyStack user? Log In

Reset Password
Enter the associated with your account, and we'll email you a link to reset your password.

Remove ads
Don't know
Know
remaining cards
Save
0:01
To flip the current card, click it or press the Spacebar key.  To move the current card to one of the three colored boxes, click on the box.  You may also press the UP ARROW key to move the card to the "Know" box, the DOWN ARROW key to move the card to the "Don't know" box, or the RIGHT ARROW key to move the card to the Remaining box.  You may also click on the card displayed in any of the three boxes to bring that card back to the center.

Pass complete!

"Know" box contains:
Time elapsed:
Retries:
restart all cards




share
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

  Normal Size     Small Size show me how

Wheelchair to Bed

Transferring a Resident from a Wheelchair to a Bed

QuestionAnswer
Step 1 Knock before entering the room. Identify and greet resident. Explain procedure. Perform hand hygiene. Provide for privacy. Ask for consent.
Step 2 Place the chair parallel to or at a 45-degree angle to the bed.
Step 3 * Lock the wheels of the wheelchair
Step 4 Remove the resident’s feet from the footrests. Remove or lift foot rests out of the way. Remove lap blanket.
Step 5 * Adjust bed to lowest position, lock bed wheels, and raise head of bed to Fowler’s or sitting position.
Step 6 Fanfold top linens to the foot of bed.
Step 7 Observe resident is wearing non-skid footwear. Stand in front of the resident. Apply transfer belt. (must be tight – a flat hand should slide snug between belt and body)
Step 8 Ask the resident to hold onto the armrests and lean forward. Grasp the transfer belt at each side.
Step 9 Position your feet and legs to provide stability for the resident and prevent the resident from falling or sliding.
Step 10 Ask the resident to push down on the armrests on the count of three. Pull resident into a standing position as you straighten your knees.
Step 11 Support the resident in the standing position.
Step 12 Turn the resident so they can reach the edge of the mattress. The back of the resident’s legs should touch the mattress.
Step 13 Continue to turn the resident until they can reach the mattress with both hands.
Step 14 Lower the resident onto the bed as you bend your hips and knees. The resident assists by leaning forward and bending the elbows and knees.
Step 15 Remove the transfer belt and footwear.
Step 16 Assist the resident to lie down. Provide for comfort.
Step 17 * Attach signal light within the resident’s reach.
Step 18 Perform hand hygiene and report and record observations.
Created by: na3