Busy. Please wait.
or

show password
Forgot Password?

Don't have an account?  Sign up 
or

Username is available taken
show password

why


Make sure to remember your password. If you forget it there is no way for StudyStack to send you a reset link. You would need to create a new account.
We do not share your email address with others. It is only used to allow you to reset your password. For details read our Privacy Policy and Terms of Service.


Already a StudyStack user? Log In

Reset Password
Enter the associated with your account, and we'll email you a link to reset your password.
Don't know
Know
remaining cards
Save
0:01
To flip the current card, click it or press the Spacebar key.  To move the current card to one of the three colored boxes, click on the box.  You may also press the UP ARROW key to move the card to the "Know" box, the DOWN ARROW key to move the card to the "Don't know" box, or the RIGHT ARROW key to move the card to the Remaining box.  You may also click on the card displayed in any of the three boxes to bring that card back to the center.

Pass complete!

"Know" box contains:
Time elapsed:
Retries:
restart all cards
share
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

  Normal Size     Small Size show me how

G-DODES

G-CODES FOR HAAS

QuestionAnswer
G00 RAPID POSITIONING MOTION
G01 LINEAR INTERPOLATION MOTION
G02 CIRCULAR INTERPOLATION MOTION CW
G03 CIRCULAR INTERPOLATION MOTION CCW
G04 DWELL (P) (P=seconds"."milliseconds)
G09 EXACT STOP, NON-MODAL
G10 PROGRAMMABLE OFFSET SETTING
G12 CW CIRCULAR POCKET MILLING
G13 CCW CIRCULAR POCKET MILLING
G17 CIRCULAR MOTION XY PLANE SELECTION (G02 or G03)
G18 CIRCULAR MOTION ZX PLANE SELECTION (G02 or G03)
G19 CIRCULAR MOTION YZ PLANE SELECTION (G02 or G03)
G20 INCH COORDINATE POSITIONING
G21 METRIC COORDINATE POSITIONING
G28 MACHINE ZERO RETURN THRU REF. POINT
G29 MOVE TO LOCATION THROUGH G28 REF. POINT
G31 FEED UNTIL SKIP FUNCTION
G35 AUTOMATIC TOOL DIAMETER MEASUREMENT
G36 AUTOMATIC WORK OFFSET MEASUREMENT
G37 AUTOMATIC TOOL LENGTH MEASUREMENT
G40 CUTTER COMP CANCEL G41/G42/G141
G41 2D CUTTER COMPENSATION, LEFT
G42 2D CUTTER COMPENSATION, RIGHT
G43 TOOL LENGTH COMPENSATION+ (H,Z)
G44 TOOL LENGTH COMPENSATION- (H,Z)
G47 TEXT ENGRAVING
G49 TOOL LENGTH COMPENSATION CANCEL G43/G44/G143
G50 SCALING G51 CANCEL
G51 SCALING
G52 GLOBAL WORK COORDINATE OFFSET SHIFT
G53 MACHINE ZERO XYZ POSITIONING, NON-MODAL
G54 - G59 WORK OFFSET POSITIONING COORDINATE 1 THRU 6
G60 UNI-DIRECTIONAL POSITIONING
G61 EXACT STOP, MODAL
G64 EXACT STOP G61 CANCEL
G65 MACRO SUB-ROUTINE CALL
G68 ROTATION (G17,G18,G19,X,Y,Z,R)
G69 ROTATION G68 CANCEL
G70 BOLT HOLE CIRCLE with a CANNED CYCLE (I,J,L)
G71 BOLT HOLE ARC with a CANNED CYCLE (I,J,K,L)
G72 BOLT HOLES ALONG AN ANGLE with a CANNED CYCLE (I,J,L)
G73 HIGH SPEED PECK DRILL CANNED CYCLE
G74 REVERSE TAPPING CANNED CYCLE
G76 FINE BORING CANNED CYCLE
G77 BACK BORE CANNED CYCLE
G80 CANCEL CANNED CYCLE
G81 DRILL CANNED CYCLE
G82 SPOT DRILL / COUNTERBORE CANNED CYCLE
G83 PECK DRILL DEEP HOLE CANNED CYCLE
G84 TAPPING CANNED CYCLE
G85 BORE IN~BORE OUT CANNED CYCLE
G86 BORE IN~STOP~RAPID OUT CANNED
G87 BORE IN~MANUAL RETRACT CANNED CYCLE
G88 BORE IN~DWELL~MANUAL RETRACT CANNED CYCLE
G89 BORE IN~DWELL~BORE OUT
G90 ABSOLUTE POSITIONING COMMAND
G91 INCREMENTAL POSITIONING COMMAND
G92 GLOBAL WORK COORDINATE SYSTEM SHIFT
G93 INVERSE TIME FEED MODE ON
G94 INVERSE TIME FEED MODE OFF / FEED PER MINUTE ON
G95 FEED PER REVOLUTION
G98 CANNED CYCLE INITIAL POINT RETURN
G99 CANNED CYCLE "R" PLANE RETURN
G100 MIRROR IMAGE G101 CANCEL
G101 MIRROR IMAGE
G102 PROGRAMMABLE OUTPUT TO RS-232
G103 LIMIT BLOCK LOOKAHEAD
G107 CYLINDRICAL MAPPING
G110 WORK OFFSET POSITIONING COORDINATE #7-26
G136 AUTOMATIC WORK OFFSET CENTER MEASUREMENT
G141 3D+ CUTTER COMPENSATION
G143 5-AXIS TOOL LENGTH COMPENSATION+
G150 GENERAL PURPOSE POCKET MILLING
G153 5-AXIS HIGH SPEED PECK DRILL CANNED CYCLE
G154 SELECT WORK OFFSET POSITIONING COORDINATE P1-99
G155 5-AXIS REVERSE TAPPING CANNED CYCLE
G161 5-AXIS DRILL CANNED CYCLE
G162 5-AXIS SPOT DRILL / COUNTERBORE CANNED CYCLE
G163 5-AXIS PECK DRILL CANNED CYCLE
G164 5-AXIS TAPPING CANNED CYCLE
G165 5-AXIS BORE IN, BORE OUT CANNED CYCLE
G166 5-AXIS BORE IN, STOP, RAPID OUT CANNED CYCLE
G169 5-AXIS BORE IN, DWELL, BORE OUT
G174 NON-VERTICAL RIGID TAPPING CCW
G184 NON-VERTICAL RIGID TAPPING CW
G187 ACCURACY CONTROL FOR HIGH SPEED MACHINING (E)
G188 GET PROGRAM FROM PST (Program Schedule Table)
Created by: 100001684745773