Busy. Please wait.

show password
Forgot Password?

Don't have an account?  Sign up 

Username is available taken
show password


Make sure to remember your password. If you forget it there is no way for StudyStack to send you a reset link. You would need to create a new account.
We do not share your email address with others. It is only used to allow you to reset your password. For details read our Privacy Policy and Terms of Service.

Already a StudyStack user? Log In

Reset Password
Enter the associated with your account, and we'll email you a link to reset your password.
Don't know
remaining cards
To flip the current card, click it or press the Spacebar key.  To move the current card to one of the three colored boxes, click on the box.  You may also press the UP ARROW key to move the card to the "Know" box, the DOWN ARROW key to move the card to the "Don't know" box, or the RIGHT ARROW key to move the card to the Remaining box.  You may also click on the card displayed in any of the three boxes to bring that card back to the center.

Pass complete!

"Know" box contains:
Time elapsed:
restart all cards
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

  Normal Size     Small Size show me how

PT2-Tests 2 & 3

The input gear in the gear box on a bulldozer has 16 teeth. The output gear has 168 teeth. The output gear speed is 28 rpm. This causes the tractor to move forward at 3 mph. How fast is the input gear rotating? IMA=No/Ni IMA =wi/wo 294 rpm
The ideal mechanical advantage (IMA) of a rotational force transformer is always: Equal to or greater than the actual mechanical advantage.
The actual mechanical advantage (AMA) of a belt drive-system equals: The ratio of torques (To/T1)
How does the third and fifth gear of a simple gear train compare if both gears have an equal number of teeth? Rotation remains the same, no change in torque.
When there is an increase in torque on the output pulley of a belt drive system, the angular speed of the output pulley: Decreases
A decrease in angular speed on the output pulley of a belt drive system causes the amount of torque on the output pulley to: Increase
If the efficiency of a gear drive is 80% and the IMA is 20, what would be the actual mechanical advantage? 16.0
In a pressure intensifier, while the area of the piston faces decrease from input piston to output piston, output pressure from the input to the output side of the intensifier: Increases
Work input equals work output in a hydraulic jack is expressed as: P1*V1=po*Vo
What remains the same from input to output pressure intensifier? Force and piston movement
The ideal mechanical advantage of a jack is given as: IMA=D1/Do
What increases from input to output in a hydraulic jack? Force and piston area
What decreases from input to output in a hydraulic jack? Piston movement
Created by: kek1112