Busy. Please wait.

show password
Forgot Password?

Don't have an account?  Sign up 

Username is available taken
show password


Make sure to remember your password. If you forget it there is no way for StudyStack to send you a reset link. You would need to create a new account.
We do not share your email address with others. It is only used to allow you to reset your password. For details read our Privacy Policy and Terms of Service.

Already a StudyStack user? Log In

Reset Password
Enter the associated with your account, and we'll email you a link to reset your password.
Don't know
remaining cards
To flip the current card, click it or press the Spacebar key.  To move the current card to one of the three colored boxes, click on the box.  You may also press the UP ARROW key to move the card to the "Know" box, the DOWN ARROW key to move the card to the "Don't know" box, or the RIGHT ARROW key to move the card to the Remaining box.  You may also click on the card displayed in any of the three boxes to bring that card back to the center.

Pass complete!

"Know" box contains:
Time elapsed:
restart all cards
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

  Normal Size     Small Size show me how

PT2-Test 1

A loading ramp rises 12 feet on one end to a platform. If the ramp has an IMA of 4, how long is the ramp? Grade=Do/Di IMA=1/Grade 48ft
In a friction-less block and tackle, a 50 pound input force applied to the block and tackle raises a 300 pound load 2 feet off the ground. How far was the rope pulled by the input force? Fi*Di=Fo*Do 12ft
The actual mechanical advantage of a block and tackle system is 5. In order to raise a 300 pound load 2 feet off the ground, what input force must be applied. Fi=Fo/AMA 60lb.
How much force would be required to push a 720 newton load up an inclined plane that is 15 meters long and raised 2 meters at the top end? Fi=Fo*Do/Di 96N
In a comparison of ideal and actual mechanical advantage, AMA is generally: Less than IMA
Make sure all units are the ____ when solving the problem. WATCH FOR THIS!!! BE CAREFUL! Same
The input force of a certain lever system is between the pivot point (fulcrum) and the load. This lever system would be: Third class
The load of a certain lever system is between the pivot point (fulcrum) and the input force. This lever system would be: Second class
In a force transformer system, when "work out" is equal to "work in" the mechanical advantage is said to be: Ideal
If a force transformer is 100% efficient, then "work in" is: Equal to work out
A force transformer has a source (or input), a coupling device (or transformer) and a: Load (or output)
Created by: kek1112