click below
click below
Normal Size Small Size show me how
General Safety
Question | Answer |
---|---|
Always wear eye_____________. | Protection |
Use equipment with the instructor’s _______. | Permission |
Use equipment only when the _________ is in the lab. | Instructor |
________all accidents or injuries. | Report |
Do not use__________________ equipment. | Defective or Faulty |
Never use equipment until you have been properly___________ in its use. | Instructed |
Loose clothing can cause_______. | Injuries |
Long hair must be ___________ or covered with a cap. | Tied back |
No __________ should be worn in the lab. | jewlery |
Never wear gloves except when handling _______lumber. | rough |
Wear_____________ shoes or boots. | closed toe |
Approved protection earmuffs should be worn around________ equipment. | noisy |
A__________must be worn when working where there is dust. | dust mask |
Finishing materials should only be used in well _________ areas. | ventilated |
Always_________spilled materials. | clean up |
Used rags are to be kept in a covered ______container. | metal |
Locate the _______________ and learn how to use them. | fire extinquishers |
Keep cabinet doors and drawers _______. | closed |
Never leave anything on the _________ that could be slipped on or tripped over. | floor |
_____vises when they are not in use. | close |
Workbenches should be kept__________and organized. | clear |
Use a_______or a rag to clear away scraps and sawdust. | brush |
Tools should be used only for what they are ___________. | designed for |
_____tools should be carried with the edge or point held down toward the floor. | sharp |
A tool should always be held by the_______. | handle |
When you are finished with a tool return it to its__________________. | proper location |
Ask for_________when you need to handle large or heavy material. | help |
Lift with your______ not with your back. | legs |
Never handle __________equipment if your hands are wet or if you are standing on a wet floor. | electrical |
Equipment with a ___________________ power cord should be reported to the instructor. It should not be used. | damaged or frayed |
Don’t yank on the power cord to disconnect a tool. Pull the________. | plug |
Use all the recommended _______and other safety devices when you operate power equipment. | guards |
Always disconnect the power equipment before you make any major_____________. | adjustments |
Never adjust equipment while it is _______. | running |
When you turn off a machine, stay with it until it is _____________stopped. | completely |
Before you use a machine, make sure the person who used it before you, has turned it off and it is completely _________. | stopped |
Don’t__________anyone while they are operating the equipment. | distract |
Using tools and equipment requires your complete __________at all times. | attention |
Always work at a _____speed. | safe |
Never fool around or _____in the lab. | play |