click below
click below
Normal Size Small Size show me how
Tech safety notes
Question | Answer |
---|---|
Always wear eye_________ | protection |
Use equipment with the instructor’s ____________. | permission |
Use equipment only when the _________ is in the lab. | teacher |
.________all accidents or injuries | report |
Do not use__________________ equipment | broken |
Never use equipment until you have been properly___________ in its use. | instructed |
Loose clothing can cause_______. | injuries |
Long hair must be ___________ or covered with a cap. | tied back |
No __________ should be worn in the lab | jewlery |
Never wear gloves except when handling _______lumber. | rough |
Wear_____________ shoes or boots. | closed toe |
Approved protection earmuffs should be worn around________ equipment. | noisy |
A_____must be worn when working where there is dust | dust mask |
14.Finishing materials should only be used in well _________ areas. | ventilated |
Always_________spilled materials | cleanup |
. Used rags are to be kept in a covered ______container. | metal |
Locate the _______________ and learn how to use them. | fire extinguishers |
Keep cabinet doors and drawers _______. | closed |
Never leave anything on the _________ that could be slipped on or tripped over. | floor |
._____vises when they are not in use | close |
Workbenches should be kept__________and organized. | clear |
Use a_______or a rag to clear away scraps and sawdust. | brush |
Tools should be used only for what they are ___________. | Designed for. |
_____tools should be carried with the edge or point held down toward the floor. | Sharp |
A tool should always be held by the_______. | Handle |
When you are finished with a tool return it to its__________________. | Proper location |
Ask for_________when you need to handle large or heavy material. | Help |
. Lift with your______ not with your back | Legs |
Never handle __________equipment if your hands are wet or if you are standing on a wet floor. | Electical |
Equipment with a ___________________ power cord should be reported to the instructor. It should not be used. | Damaged or frayed |
31.Don’t yank on the power cord to disconnect a tool. Pull the________. | Plug |
Use all the recommended _______and other safety devices when you operate power equipment. | Guards |
Always disconnect the power equipment before you make any major_____________. | adjustments |
Never adjust equipment while it is _______. | Running |
When you turn off a machine, stay with it until it is _____________stopped. | Completely |
Before you use a machine, make sure the person who used it before you, has turned it off and it is completely _________. | Stoppped |
. Don’t__________anyone while they are operating the equipment. | Distract |
Using tools and equipment requires your complete __________at all times. | Attention |
Always work at a _____speed. | Safe |
Never fool around or _____in the lab. | Play |