click below
click below
Normal Size Small Size show me how
Chapter 3 part 1
COMNAVAIRFORINST 4790.2A
Question | Answer |
---|---|
The NAMP, implemented through COMNAVAIRFOR, supports the CNO and the CMC readiness and safety objectives and provides for optimum use of manpower, facilities, material, and what else? | Funds |
The NAMP is founded upon what concept? | Three-level maintenance |
What maintenance is performed by an operating unit on a day-to-day basis in support of its own operations? | O-Level |
What maintenance mission is to enhance and sustain the combat readiness and mission capacity of supported activities by providing quality and timely material support at the nearest location with the lowest practical resource expenditure? | I-Level |
What maintenance is performed at or by FRC sites to ensure continued flying integrity of airframes and flight systems during subsequent operational service periods? | D-Level |
What are two types of aircraft maintenance performed within the naval establishment without distinction as to levels of maintenance? | Rework and Upkeep |
What identify the lowest maintenance level at which a task may be performed? | Functions |
What will assign limited I-Level maintenance level responsibility upon recommendation by the cognizant ACC/TYCOM? | COMNAVAIRSYSCOM |
Selected D-LEVEL maintenance functions may be performed at designated what? | IMAs |
Maintenance functions and policy for guided missiles, aircraft guns, targets, bomd assemblies, rockets, jet assisted takeoff, and pyrotechnics are listed in what instruction? | OPNAVINST 8000.16 |
WHat is defined as all equipment required on the ground to make an aircraft sysytem, support system, operational in its intended enviornment? | Support Equipment |
SE is catagorized as CSE and what else? | PSE |
Assignements and classification of O-level and I-level maintenace functions are applicable to what? | UAS |
The CNO and who else assign aircraft maintenace tasks and responsibilities to activities of naval operating and training forces, FMFs, and nonfleet Marine forces? | CMC |
WHat in addition to air facilities are responsible for perfoming the levels of maintenance designated by the Marine Corps Tables of Organization and for providing flight line services for transient aircraft? | MCASs |
What detactments perform their own maintenance? | Helos |
COMNAVAIRSYSCOM is responsible for managing what? | MATCALS |
Any NAMPSOP program not applicable to the special activity shall be approved by what? | TYCOM |
Only D-level FRCs may generate Local Command Procedures using what format? | OPNAVINST 5215.17 |
What can detect defects with a high degree of accuracy and with no adverse affect upon the use of the part or system being inspected? | NONdestructive Inspection Program (NDI) |
Contractor NDI personnel shall be certified per what unless otherwise stated within specific contract stipulations? | NAS 410 |
WHat instruction assigns the responsibilities within COMNAVAIRSYSCOM for the various elements of the NDI program? | NAVAIRINST 13070.1 |
WHat provides a record of certification and recertification of NDI technicians and operators? | NDI Certification Record (CNAF 4790/139) |
The Naval Aircraft NDI Technician school and FRCs shall retain records of training materials used, test given, and individual test scores for a minimum of how long? | 3 years |
NDI technicians are Navy aviation structural mechanics and Marine Corps structures mechanics , of what and above, who have succesfully completed the Naval Aircraft NDI technician Class C1 course? | E-4 |
NDI tecnicians, normally attacted to an IMA/FRC, are assigned what NEC or MOS 6033 and may be certified to perform fluorecent, penetrant magnetic particlle, eddy current, ultrasonic, and radiographic NDI methods? | NEC 7225 |
Current certification of NDI technians regularly engaged in all NDI methods may be extended by the ACC/TYCOM for up to how long if circumstances warrant? | 1 year |
Who are Navy and Marine Corps personnel, of the grade E-4 and above, who have successfully completed required training and may be certified to perform limited NDI tasks? | NDI operators |
Task-specific trqaining shall be provided in an amount that will vary with complexity of the TD/technician directed NDI tasks, but shall not be less than how long for the first aeronautical part, assembly, or structural feature listed? | 4 hours |
NDI techs. shall maintain X-ray profieciency by performing radiographic images X-ray inspections at least how often? | Semi-Monthly |
For activities authorized to perform open facility X-ray, all NDI techs. shall perform at least one open facility X-ray inspection every how often? | 3 months |
NDI techs. with profieciency lapses exceeding how many consecutive months, but less than 3 years, require refersher training that must be administed by a FRC or NDI specialist to re-establish certification? | 12 |
Newly certified NDI techs. shall require at least how many monthes of supervised work experience before assignment at an activity without any experienced NDI technicians? | 3 |
All personnel handling cartriges, CADs, pyrotechnics, and what fall underr the Explosives Handling Personnel Qualification and Certification Program? | PADs |
COMNAVAIRSYSCOM manages the Aircraft Confined Space Program per what? | NAVAIR 01-1A-35 |
What provides a unique application of reconnaissance and surveillance through the use of recoverable and highly versatille airborne systems? | UAS Program |
What authorises maintenace procedures performed under combat conditions? | Aircraft Battle Damage Repair |
For repairs not contained in ABDR publications, maintenance personnel may perform ABDR actions only when directed by whom? | D-level engineers |
What is the title of the overall program which provides the data required for the effective management of SE at all levels of aircraft mantenance? | AMMRL Program |
The Aircraft Maintenance Material Readiness List program covers over how many end items of aircraft maintenace SE and OTPS elements used throughout the Navy and Marine Corps by aircraft maintenance activities? | 37,000 |
Required rework of SE beyond the capability of the IMA/FRC shall be performed under the provision of what instruction at the next level of maintenance, normally an FRC or commercial contractor? | NAVAIRINST 13680.1 |
D-Level calibration program functions are described in what instruction? | NAVAIRINST 13640.1 |
What shall develop required O-level and I-level SE maintenance training courses for user activities as approved by CNO? | CNET |
Who is responsible for D-level rework, modification, and calibration of SE scheduled into the FRC under NAVAIRINST 13680.1 and NAVAIRINST 13640.1? | FRC CO |
Assignment of ICPs for SE may be found in what pub? | NAVSUP P 485 |
What are activities assigned responsibility by COMNAVAIRSYSCOM to perform specified maintenance engineering functions for SE? | SE ISSCs |
AN IMRL is constructed for all Navy and Marine Corps aviation maintenance activities by extracting applicable portions of the data from what? | SERMIS |
What contains detailed IMRL info? | NAVAIRINST 13650.1 |
IMRLs are presented in how many sections, with a monthly supplement? | 5 |
What manintains inventory, utilization, and readiness data for SE and IMRL items? | LAMS |
The SE transaction Trport is used by IMRL activites for SE transaction reporting? | CNAF 4790/64 |
ALthough continuous management control of SE is maintained by timely submission of TRs, an inventory of SE must be conducted, records corrected, and a report submitted how often? | Annually |
NDI instructors are military or civilian personnel who have completed Instructional Delivery Continuum Journeyman Instructor Training course? or equivelent? | Course A-012-0077 |