ch 30 physics Word Scramble
|
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
| Question | Answer |
| Who are the SMPTE? | the society of motion picture and television engineers |
| The pattern used to make measurements of the resolution of display systems is the _________. | SMPTE |
| What 2 committees set the standard for DICOM? | ACR, and NEMA |
| How are medical images transferred? | thru the DICOM standard |
| This allows the transfer of medical images from one DICOM display to another DICOM display to remain consistent in grayscale? | perceptual linearization |
| In 1998, _______ released the first set of standards for flat panel displays. | VESA |
| ____________ is a procedure manual for testing all digital display devices. | AAPM TG 18 |
| This is used to evaluate monitor display reflection ands to assess ambient light conditions? | illuminance meter |
| How many types of luminance meters are there? | 2 |
| What type of luminance meter is used to test from a distance of 1meter? | telescopic |
| What test pattern is used the most for QC testing of the digital display devices? | AAPM TG 18 |
| The luminance meter requires the use of properly calibrated _________. | photometers |
| What 2 photometers can test for luminance response? | telescopic, near-range |
| What does TG in AAPM TG 18 stand for? | task group |
| Geometric distortion can be tested by which test pattern? | TG 18 LPV/LPH or TG 18 QC |
| How should the test pattern appear in the question above? | have the appearance of straight lines in the pattern |
| What are the 2 types of reflection? | specular, diffuse |
| This type of reflection occurs when light is ramdomly scattered onto the monitor. | diffuse |
| This type of reflection results in the generation on mirror images of light sources surrounding the monitor. | specular |
| Monochrome monitors reduce the amount of _______ reflection because of an improved _______________ coating. | specular, anti-reflective |
| Diffuse reflection can be tested by this type of pattern. | TG 18-AD |
| For the pattern above, what factor can you change when testing the diffuse reflection level? | turn on or off the ambient light |
| What really is ambient light???? | Basically its light that is already present, whether it be natural or artificial |
| What test is done to perform a qualitative evaulation of the luminance response of a digital diaplay device? | TG 18 CT |
| What angle is best for viewing a digital display monitor? | straight on! |
| What test pattern is used to measure display resolution? | TG 18-CX |
| What test pattern is used to measure the level of noise? | TG 18-AFC |
| What test pattern should shoiuld be viewed daily? | TG 18-QC |
| Who is in charge of daily Quality Control issues? | A QC tech should be assigned to do the daily testing |
| When developing a QC program, what factors must be included? | acceptance test of any new digital device, routine QC by tech, periodic reviews of QC program by medical physicist, annual and post repair performance evaluations |
| All this was off your power point in BOLD letters! | Review the Power Point! |
Created by:
radgirl37
Popular Radiology sets