Aseptic Techniques Word Scramble
|
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
| Question | Answer |
| Certain procedures carried out during the preparation of a sterile product to minimize contamination | Aseptic Technique |
| Means "taking place in a hospital" | Nosocomial |
| What is the most frequent cause of contamination? | The person compounding |
| This type of filter removes large particles and resembles a residential air conditioner filter. | Pre-Filter |
| This type of filter removes 99.97% of particles and microorganisms 0.3 microns or larger. | HEPA Filters |
| HEPA filters must be replaced: | on a regular basis |
| HEPA filters require regular maintenance : | every six months |
| JCAHO requires maintenance: | every 12 months |
| Air flows horizontally across work area | Horizontal Hood |
| Air flows downward onto the surface of work area, safer for the compounder | Vertical Hood |
| Parts of a syringe: | plunger, barrel, tip for needle attachment, markings for measurement, top collar, flat end |
| Syringe sizes range from: | 1-100 ml |
| When measuring parental medication, always use the syringe that: | is closest to the amount that needs to be measured. |
| This type of syringe is the most commonly used. | Plastic syringe |
| What two factors are considered when deciding what type of syringe should be used? | Compatibility and cost |
| Parts of a needle: | Shaft, Hub, Bevel |
| Outside diameter is the _____ of the needle. | gauge |
| The larger the gauge number the _____ the diameter. | smaller |
| The smaller the gauge number the ____ the diameter. | larger |
| Injections bypasses the: | alimentary (digestive) canal |
| Disadvantages of parental routes: | risk of infection, tissue damage, pain/anxiety |
| Drug is injected into superficial layer of skin/most commonly used: | Intradermal |
| Injected into arteries: | Intra-arterial |
| Injected into heart: | Intracardiac |
| Injected into joint: | Intra-articular |
| Injected into spinal cord: | Intrasynovial |
| Injected into brain-spinal cord: | Intrathecal |
| D5W/D10W | 5% dextrose in water/10% dextrose in water |
| 0.9% Sodium Chloride | |
| Having the same osmotic pressure as another solution | Isotonic |
| 1/2 NS = | 0.45% Sodium Chloride |
| Sodium Chloride/NS is isotonic with _____. | blood |
| Used for reconstitution | Sodium Chloride, Sterile Water |
| Hypotonic solutions have a ______ osmotic pressure than red blood cells. | lower |
| Used for patient fluid replenishment. | Ringer's Solution |
| Drug is injected in the loose tissue beneath the skin: | Subcutaneous (SC or SQ) |
| Drug is injected into muscle mass: | Intramuscular |
| Drug is administered into the veins: | Intravenous (IV) |
| With the exception of lipids, IV injections of solutions that are "_____________" should not be administered. | cloudy in appearance |
| When should you disinfect the hood? | At the beginning and end of work shift, hourly during operation, and after spills or known contaminaiton |
| The Laminar Air Flow Hood should be running for at least _____ minutes before using. | 30 |
| You must work at least _____ inches within the hood. | six |
| Avoid working over _________ to prevent contamination fall into preparation area. | open containers |
| Blocking areas of preparation that must remain sterile from the air flow, thus allowing for contamination is called: | Shadowing |
| Areas behind objects in the airflow. | Dead spaces |
| Sterile product preparation room should be free of ______, especially _____ as a source of particles. | dust, cardboard |
| Sterile room should be kept away from ___________. | common routes of personnel traffic |
| While laminar air flow hoods prevent airborne contamination, they do not __________. | guarantee a sterile products |
| Prior to compounding, remove rings, watches, and bracelets which are ideal for _______ to hide. | bacteria |
| While working in the hood, do not introduce items that are not _________ for the preparation (ex. papers, pencils). | essential |
| For drugs in a vial in powder form. it is necessary to reconstitute with a suitable ______. | diluent |
| Prior to compounding, wash hands and forearms to the elbows with the appropriate ________ agent. This should be done for at least ______. | germicidal, 30 seconds |
| When introducing liquid into a plastic IV bag, the needle must be at least _____ inches to penetrate the diaphragm. | 1/2 |
| Containers made entirely of glass. | Ampule |
| When withdrawing liquid from a vial, remove the cover of the vial and wipe rubber surface with an ______________. | alcohol swab |
| Before withdrawing necessary amount of liquid from a vial, you should withdraw the same volume of __________ into the syringe, | air |
| What should you do when there are air bubbles in the syringe? | Tap the syringe to make all of the bubbles go to the top, then pull down and back up to remove it |
| Do not _____ needles. | clip, bend, or recap |
| How should you open an ampule? | Hold the ampule neck with a gauze and snap it open quickly. |
| A _______ should always be used when withdrawing from an ampule to prevent glass particles from getting into the liquid. | filter straw/needle |
| In preparation of parental products, do not ______, thoroughly _____ instead. | shake, rotate (or tilt or roll) |
| Why is isotonicity important? | Because the injectable solution needs to be isotonic with the blood. |
| Important characteristics of parenteral products are: | acid content of the pH of the solution, and color and clarity of an IV |
| What should you do to detect particles in an IV bag? | Hold the product in the light or a dark background |
| What is Total Parenteral Nutrition (TPN)? | An IV nutritional solution |
| TPNs that contain lipid emulsions are not clear, therefore: | precipitation cannot be seen |
| _____ is a protein source. | Amino Acid |
| IVPB is the administration: | of a second solution into an already established primary line |
| High concentrations of _______ is a carbohydrate source. | dextrose |
| An IVPB must be hung ______ than the primary solution. | higher |
| ______ emulsions are a fat source. | Lipid |
| Used to bathe or flush open wounds or body cavities. | Irrigation |
| All items that have come in contact with antineoplastic agents must be disposed of in containers with the: | biohazard symbol |
| What class cabinet is used in preparing antineoplastic agents? | Class II |
| Which direction does the air go in Class II Biological Safety Cabinets? | downward |
| If a vial is _________ with air, a spray or spill may occur when removing the needle. | over pressurized |
| Hazardous waste container should be: | removed from the work area and destroyed. |
| Why are antineoplastic agents a special concern? | Because of their mutagenic and carcinogenic effects |
| The number of people working with antineoplastic agents should be: | kept to a minimum |
| The Class II Biological Safety Cabinet should: | be certified annually or any time the cabinet is moved, and the blower should be on at all times |
| Considerations in parenteral products include: | Stability time, appropriate vehcile solution (compatibility), light protection |
| Why are antineoplastic agents a special concern? | Because of their mutagenic and carcinogenic effects |
| The number of people working with antineoplastic agents should be: | kept to a minimum |
| The Class II Biological Safety Cabinet should: | be certified annually or any time the cabinet is moved, and the blower should be on at all times |
| Considerations in parenteral products include: | Stability time, appropriate vehcile solution (compatibility), light protection |
| ________ of a liquid is done by using a 0.22 micron filter. | Sterilization |
| Parenteral Product Reference Materials include: | Handbook on Injectables, Guide to Parenteral Admixtures |
| _______ of particulate matter is done by using a 5 micron filter. | Filtration |
| What information does the parental references provide? | Drug solution, compatibility, dosage, and dilution info |
| A non-government, non-profit organization designed to create standards on patient safety, healthcare information, and verification of products. | United States Pharmacopeia |
| Purpose is to set standards for compounding to prevent harm and death to patients. | USP 797 |
| One route of exposure to hazardous drug is: | inhalation |
| Sharps used in hazardous waste are disinfected in an: | autoclave or microwave |
| The counters must be cleaned in a ________ motion. | sweeping |
| CSP used for emergency situations | Immediate Use CSPs |
| Personal Protective Equipement include: | non-shedding gown, powder-free gloves, eye and face protection such as face shields |
| Sterilization methods include: | dry heat, filtration, and steam |
| An example of Standard Operating Procedures (SOP) is: | 70% isopropyl alcohol must be used to disinfect all additive containers |
| What determines the CSP risk level? | compounding setting, contamination potential, |
| If Immediate Use CSP are not administered within ____ hour after preparation begins, it must be _______. | one, thrown out |
| What are the different risk levels? | Immediate Use, Low Risk, Low Risk with 12 hour or less BUD, medium risk, and high risk |
| Compounded using sterile drug and sterile devices, using aseptic techniques | Low Risk Level CSP |
| Most of the risk level CSPs require ISO Class ___. | 5 |
| Administration must start within 12 hours or less after preparation | Low Risk Level with 12-hour or less BUD |
| Uses complex aseptic technique, multiple small doses of sterile products are combined to create CSPs that will be given to several patients or one patient multiple times | Medium Risk Level CSP |
| Uses non-sterile ingredients and devices | High Risk Level CSPs |
| This vial contains a perservative | Multi dose vial |
| This vial doesn't contain a perservative | Single dose vial |
| destruction of all microbal life | sterlization |
| destruction of pacific pathogenic microrganisms | disinfection |
| Proper air quality is measured in: | ISO |
| As ISO class goes up, so does that number of: | particles allowed per cubic meter |
| Room where "hoods" are placed for compounding | Buffer area |
| Used to ensure proper air quality, located between buffer area and common pharmacy | Ante area |
| Volumetric air sampling is required: | every 6 months |
| If a hazardous drug were to spill, what should the pharmacy technician do? | use a spill kit |
| If the worker is containmated by a hazardous drug, what should be done? | use eyewash kits and soap and seek medical attention |
| Hazardous waste should be disposed of in: | an incinerator |
Created by:
Michelle Lee
Popular Pharmacology sets