General safety notes Word Scramble
|
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
| Question | Answer |
| Always wear...protection. | Eye |
| Use equipment with the ... permission. | Instructor's |
| Use equipment only when ... is in the lab. | Instructor |
| ... all accidents or injuries. | Report |
| Do not use ... equipment. | Defective or faulty |
| Never use equipment until you are properly... in its use. | Instructed |
| ... can causs injuries. | loose clothing |
| ... must be tied back or covered with a cap. | long hair |
| No ... should be worn in the lab. | jewelry |
| Never wear gloves except when handling... | rough lumber. |
| Wear ... shoes or boots. | closed toe |
| Approved protection earmuffs should be worn around ... equipment. | noisy |
| A ... must be worn when working where there is dust. | dust mask |
| Finishing ... should only be used in well ventilated areas. | materials |
| Always ... spilled materials. | clean up |
| Used rags are to be kept in a ... container. | metal |
| Locate the ... and learn how to use it. | fire extinguisher |
| Keep cabinet doors and drawers ... | closed |
| Never leave anything on the ... that can be tripped on or slipped on. | floor |
| ... vices when they are not in use. | close |
| Work benches should be kept ... and organized. | clear |
| Use a ... or a rag to clear away scraps and saw dust. | a brush |
| Tools should be used only for what they are ... | designed for |
| ... tools should be carried with the edge or point held down toward the floor. | sharp |
| A tool should always be by the ... | handle |
| When you're finished with a tool, return it to its ... | proper location |
| Ask for ... when you need to handle large or heavy materials | help |
| Lift with your ... not your back. | legs |
| Never handle ... if your hands are wet or if you're standing on a wet floor. | electrical |
| Equipment with a ... power cord should be reported to the instructor. | Damaged or frayed |
| Don't yank the power cord. Pull the ... | plug |
| Use all recommended ... and other safety devices when you operate power equipment. | guards |
| Always disconnect the power equipment before you make any major ... | adjustments |
| Mever adjust the equipment while it is ... | running |
| WEhen you turn off a machine, stay with it until it is ... | stopped |
| Don't ... anyone while they are operating equipment. | distract |
| Using tools and equipment requires your complete... at all times. | attention |
| Always work at a ... speed | safe |
| never fool or ... in the lab | play |
Created by:
J0708899
Popular Engineering sets