CH 37 RAD 170 Word Scramble
|
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
| Question | Answer |
| AEC was introduced in 1942 by _____________. | Russell H. Morgan |
| The single function of an AEC is to eliminate the need for the radiographer to set an exposure ____. | time |
| During the use of AEC, ___ and ____ may still be set manually. | mA; kVp |
| AEC provide diagnostic quality exposures only for structures positioned directly above the _____ _____. | ionization chambers |
| The art of using AEC is the art of ______. | positioning |
| All AEC systems permit the adjustment of the amount of ______ necessary to send the exposure termination signal. | radiation |
| The ____ controls should not be used to compensate for patient part thickness or kVp changes. | density (*AEC does this automatically*) |
| Poor positioning skills result in an _____ repeat rate when using AEC. | increased |
| AEC problems with subject density and contrast occur whenever an ____ density is present or when an ____ density is lacking. | unexpected; expected |
| Collimation located close to activated chambers should be ______. | avoided |
| The ____ ____ _____ is the length of time necessary for the AEC to respond to the ionization and send a signal to terminate the exposure. | minimum response time |
| The backup time should be set at ____ percent of the anticipated manual exposure time. | 150 |
| Federal law requires automatic termination at ____ mAs when working above ___ kVp. | 600; 50 |
| ______ combine an AEC system with a technique chart that is computerized to correspond to anatomical procedures. | Anatomically programmed radiography (APR) |
| A manual technique will always provide a precisely _______ exposure. | repeatable |
Created by:
teachable monkeys
Popular Radiology sets