X-ray circuits
Quiz yourself by thinking what should be in
each of the black spaces below before clicking
on it to display the answer.
Help!
|
|
||||
|---|---|---|---|---|---|
| line voltage compensator is incorporated into the primary circuit to: | show 🗑
|
||||
| this meter measures the current passing between the electrodes of an x-ray tube | show 🗑
|
||||
| show | 1000 times higher
🗑
|
||||
| show | 4-6 amps (temp of 2200 degrees celcius)
🗑
|
||||
| show | reduce the risk from electrical shock
🗑
|
||||
| show | High voltage (kV) AC
🗑
|
||||
| show | 300 mA
🗑
|
||||
| higher mA= _______ current, _________ temp of the filament | show 🗑
|
||||
| the high tension transformer is located in an oil-filled tank that also houses the | show 🗑
|
||||
| show | electron cloud, space charge compensator
🗑
|
||||
| show | ammeter
🗑
|
||||
| show | capacitor
🗑
|
||||
| the pre-reading kV meter is incorporated into the x-ray control panel to measure the potential difference on the | show 🗑
|
||||
| most common device used to create the high potential difference across the x-ray tube | show 🗑
|
||||
| reduction of voltage and development of high amperage by a step down transformer occurs in the | show 🗑
|
||||
| show | second (exposure) stage of the exposure switch
🗑
|
||||
| show | primary circuit
🗑
|
||||
| which circuit? 10-12 volts | show 🗑
|
||||
| show | secondary circuit
🗑
|
||||
| show | transformer, the millampere-seconds (mAs) meter, the rectifiers, the high tension cables and the anode of the x-ray tube
🗑
|
||||
| why can you only obtain mAs meter readings immediately after an exposure? | show 🗑
|
||||
| show | watts
🗑
|
||||
| power formula | show 🗑
|
||||
| a transformer has 200 primary and 20,000 secondary turns of wire. what secondary voltage will be induced if 110 volts are placed on the primary coil? | show 🗑
|
Review the information in the table. When you are ready to quiz yourself you can hide individual columns or the entire table. Then you can click on the empty cells to reveal the answer. Try to recall what will be displayed before clicking the empty cell.
To hide a column, click on the column name.
To hide the entire table, click on the "Hide All" button.
You may also shuffle the rows of the table by clicking on the "Shuffle" button.
Or sort by any of the columns using the down arrow next to any column heading.
If you know all the data on any row, you can temporarily remove it by tapping the trash can to the right of the row.
To hide a column, click on the column name.
To hide the entire table, click on the "Hide All" button.
You may also shuffle the rows of the table by clicking on the "Shuffle" button.
Or sort by any of the columns using the down arrow next to any column heading.
If you know all the data on any row, you can temporarily remove it by tapping the trash can to the right of the row.
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
Created by:
kristinalyn
Popular Radiology sets