Help
Options
Didn't know it?
click below
click below
Knew it?
click below
click below
Don't Know
Remaining cards (0)
Know
retry
shuffle
restart
0:00
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.
Normal Size Small Size show me how
Normal Size Small Size show me how
RADT334-XRay Circuit
Review parts of the x-ray circuit
| Question | Answer |
|---|---|
| part of the x-ray circuit that contains the kvp selector, kvp meter, exposure timer and exposure switch | primary side/circuit |
| part of the x-ray circut that contains the mA selector, focal spot selector and step-down transformer | filament circuit |
| part of the x-ray circuit that contains the mA meter and rectifiers | secondary side/circuit |
| adjusts autotransformer to deliver precisely 220 volts | line voltage compensator |
| supplies a precise voltage to the high voltage circuit | autotransformer |
| reads the voltage that will be applied to the secondary side of the step up transformer | kVp meter |
| filament uses this current | 3 to 6 A |
| this is what happens to current when voltage is increased | decreased |
| this is what happens to voltage when current is increased | decreased |
| type of timer that has a minimum exposure time of 1/60 s and has to be reset each time exposure is made | synchronous |
| type of timer that is the most accurate but also most sophisticated and complicated | electronic |
| type of timer that monitors the product of mA and exposure time and terminates the exposure when desired mAs value is attained; used on falling load imaging systems | mAs |
| type of timer that measures the quantity of radiation reaching the image receptor and terminates the exposure when the image receptor has received enough radiation to provide the required optical density | AEC |
| most commonly used AEC | ionization chamber |
| type of rectifiers used in x-ray imaging systems today | solid-state |
| if positive charge is applied to the n side of the solid state rectifier then electrons____ flow | will not |
| if negative charge is applied to the n side of the solid state rectifier then electrons _____ flow | will |
| number of rectifiers used in half-wave rectification | two |
| number of rectifiers used in full-wave rectification | four |
| number of pulses per second with half wave rectification | 60 |
| number of pulses per second with full wave rectification | 120 |
| number of pulses per second with three phase power (non rectified/6 pulse) | 360 |
| number of pulses per second with three phase power (rectified/12 pulse) | 720 |
| type of generator that generates high voltage, full-wave rectified power to a higher frequency (usually 500-25,000 Hz) | high-frequency |
| type of generator used in portable machines | high-frequency |
| type of generator that builds up a charge then releases it with completion of the circuit | capacitor-discharge |
| type of generator that is used to provide the highest mA setting at the shortest possible times where the computer will automatically calibrate the time of the exposure allowing consistently shorter exposures | falling-load generator |
| voltage ripple percent for single phase half wave rectified units | one hundred |
| voltage ripple percent for single phase full wave rectified units | one hundred |
| voltage ripple percent for three phase, six pulse units | thirteen |
| voltage ripple percent for three phase, twelve pulse units | four |
| voltage ripple percent for three phase, high frequency units | less than 1 |
| X-ray production efficiency ______ with an increase in voltage ripple | decreases |
| High frequency generators cost _____ than single phase generators | more |
| multiplying mA and kVp then dividing by 1000 is the equation for power rating for _______. | three phase and high frequency |
| multiplying 0.7, mA, and kVp then dividing by 1000 is the equation for power rating for _____. | single phase units |
Created by:
hschmuck1
Popular Radiology sets