Save
Busy. Please wait.
Log in with Clever
or
show password
Forgot Password?
Don't have an account?  Sign up 
Sign up using Clever
or
Username is available taken
show password


Make sure to remember your password. If you forget it there is no way for StudyStack to send you a reset link. You would need to create a new account. Your email address is only used to allow you to reset your password. See our Privacy Policy and Terms of Service.

Already a StudyStack user? Log In

Reset Password
Enter the associated with your account, and we'll email you a link to reset your password.
focusNode
Didn't know it?
click below
 
Knew it?
click below
Don't Know
Remaining cards (0)
Know
0:00
edit
Embed Code - If you would like this activity on your web page, copy the script below and paste it into your web page.

  Normal Size     Small Size show me how

CAD

QuestionAnswer
the view that shows the dept and width top view
the amount that two mating surfaces must touch contact area
the amount of variation allowed in the dimension of an object., plus tand minus the toleranceiung demensions indicate the tolerance range above-and below the basic dimension tolerance
shows the exact location of parts of an object location dimension
dimensioning show the distance from apex to arc radii
a curved exterior corners of two surfaces rounds
acceptable opportunity to shortcut normal dimension procedures is to dimension from quadrant to quadrant slots
the view that shows the height and depth right side view
a poly gon with six equal sides hexagon
lines that never meet if extended any distance parallel lines
reverse curve ogee curve
a five sided geometric figure with each corner forming an 118 degree angle pentagon
lines used to represent the material through which a cut is mande in order to show an interior sectional view section lining
a line used to indicate a specific area chain line
a line drawn on a view where a cut was made in order to define the location of the imaginary sectional plane cutting plane line
lines used to describe the size of an object extension line
thin solid line used to connect a specific area on a drawing to a dimension or notation leader line
a line that defins the common center of symmetrical objects centerline
standardization of lines used on technical drawings by line weight and style line conventions
lines that show the location of stiches in a material stitch line
uses a U.S. customary inch fraction unit of measure mechanical engineer's scale
type of surface media film
a scale that contains full subdivision lines throughout the entire length of the scale full-divided scale
uses a us customanry inch-decimal unit of measure civil engineer's scale
used for curcles up to 12 inche diameter bow compass
a device used to divide and transfer dividers
Created by: hotrod654
Popular Miscellaneous sets

 

 



Voices

Use these flashcards to help memorize information. Look at the large card and try to recall what is on the other side. Then click the card to flip it. If you knew the answer, click the green Know box. Otherwise, click the red Don't know box.

When you've placed seven or more cards in the Don't know box, click "retry" to try those cards again.

If you've accidentally put the card in the wrong box, just click on the card to take it out of the box.

You can also use your keyboard to move the cards as follows:

If you are logged in to your account, this website will remember which cards you know and don't know so that they are in the same box the next time you log in.

When you need a break, try one of the other activities listed below the flashcards like Matching, Snowman, or Hungry Bug. Although it may feel like you're playing a game, your brain is still making more connections with the information to help you out.

To see how well you know the information, try the Quiz or Test activity.

Pass complete!
"Know" box contains:
Time elapsed:
Retries:
restart all cards